Logging into an Zenitel IP Device

Access the web interface of a Zenitel IP device with a standard web browser:

Connect the laptop and the IP device to a network switch, and open a web browser

- The login page will be displayed.

The login page

To log into the device:

The Station Information page will now be displayed, showing the IP configuration and status.

Default IP addresses

The Zenitel stations and devices are set to obtain IP address automatically from the network (DHCP). If no DHCP server present, it will get a random 169.254.x.x address The station will speak its own IP address when pressing the Call button, a Digit key a DAK key or activate an Input of the station.
The previous generation of Zenitel IP stations (known as INCA) has default IP address 169.254.1.100.

In order to access the web interface of the station, your computer must be in the same subnet range as the device.

Click Start, and type Control in the search field, then select Control Panel.
Click on Network and Internet.
Click on Network and Sharing Center.
On the left pane, click the Change adapter settings link.
Right-click the network adapter and select Properties.
Select the Internet Protocol Version 4 (TCP/IPv4) option.
Click the Properties button.
Select the Use the following IP address option.
Set the IP address (e.g., 169.254.1.90).
Set the Subnet mask. (e.g., 255.255.0.0).
Set the Default gateway. This address is typically your router’s IP address (e.g., 169.254.1.1).
Click OK.
Click Close again to close the network adapter properties.

Setting a Static IP Address on the laptop

Once you’ve completed the steps, you can open your web browser and try logging into the device.

This article is linked to from the document A100K11920