ITS-1 (Edge)

ITS-1 unit in IC-EDGE System

This article describes how to set up the ITS-1 unit in an IC-EDGE System.

Licensing

No license is required for the ITS-1, as long as the total number of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required.

Edge Controller configuration

You need to manually add the ITS-1 to the Edge Controller.

• Log on to the Edge Controller
• From the menu Edge Controller > System Configuration > Directory, under the Manually Added Devices section, press the "+" button
• Select Zenitel Device from the dropdown list
• Modify Number and Name as required
• Optionally one can add a SIP Password. If a password is entered, one have to manually enter the same password in the SIP Authentication Password field in the ITSV-5 unit. The password is used as authentication during the registration process.
• Press Save to store the new device in the Edge Controller

Adding new ITS-1 unit to the Edge System

Basic Configuration of the ITS-1

Network settings

1. Power up the ITS-1 unit
2. Push on the touch screen, and select Settings > Network status and make a note of the IP address.
3. Open a web browser on your computer, enter the IP address into the address bar (e.g. "http://192.168.0.160" or "192.168.0.160") and click Enter.
4. Enter the user name (default: admin) and password (default: alphaadmin) in the pop-up dialogue box and click Login
5. The very first time you log in you are prompted to change the password.

Make sure to make a note of the new password!

6. Select Network Settings > Ethernet Settings to configure the phone to use DHCP (obtain an IP address automatically) or Static IP address.

Network settings in the ITS-1 phone

SIP account

1. Select Account > Account 1 > General Settings tab
2. Account active: Enable
3. Account name: Is shown in the LCD screen to identify the account
4. SIP Server: Enter the IP address of the Edge Controller
5. SIP User ID: Must match the number entered in the Edge Controller
6. SIP Authentication ID: This ID is identical to the "SIP User ID"
7. SIP Authentication Password (Optionally). If a password is entered, one have to enter the same password in the SIP Password field of the Edge Controller. The password is used as authentication during the registration process.
8. Display Name: This text is shown as Caller ID when placing a call
9. Press Save, then Apply to activate the settings

Setting up a SIP account in the ITS-1