Turbine Compact series board connectors
From Zenitel Wiki
| Item | Description | Comment |
| 1¹ | Relay | Double Throw (SPDT) relay contact with 60W switching power. Max: 250VAC/220VDC, 2A, 60W |
| 2¹ | I/O interface | 6 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output |
| 3¹ | Line Output | Balanced 600 ohm audio line out. Suitable for external induction loop amplifier, PA amplifiers etc |
| 4¹ | Speaker Output | Connection for 8 ohm loudspeaker (50 ohm on TMIS-x) |
| 5¹ | Microphone Input | Electret mic input |
| 6¹ | Power Input | Optional 24VDC power input from external power supply (if PoE is not provided) |
| 7 | LAN Port | 10/100Mbps RJ-45 port for Ethernet connection. |
|
¹) Connectable conductors: 0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm². |
|
|
|
Rear side
Using an output to control a relay:
Most general purpose P-Channel MOSFET's should work. Recommended example: BSS84
See also Adding additional relay(s) to a Zenitel IP Device
Front Board (A100C08129)
|
|
Not applicable to TKIS-2 and TMIS-x |
Front
Rear
