Actions

Upgrade from Pulse to IC-EDGE

From Zenitel Wiki

Revision as of 10:07, 10 September 2019 by Gsorensen (talk | contribs) (→‎Prerequisite)
icon This article is under construction!


This article describes how to upgrade from Pulse (VS-IS 4.x) to IC-EDGE.

Prerequisite

  • You can upgrade from Pulse (VS-IS 4.x) to IC-EDGE, but the whole system needs to run with the same Turbine software (VS-IS 5.0 or newer).
  • In an IC-EDGE System, INCA intercoms cannot be used as the Edge Controller.
  • TCIV video intercoms should not be used as the Edge Controller for systems exceeding 4 devices.
  • VS-IMT can be used for station discovery and upgrade but must not be used to configure IC-EDGE.

Pulse to IC-EDGE Licenses

Pulse licenses will be honored in an IC-EGDE System. This means that when you upgrade firmware from VS-IS 4.x to 5.x your Pulse licenses will work for IC-EDGE.
More information regarding licensing in IC-EDGE can be found here.

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Upgrade_from_Pulse_to_IC-EDGE&oldid=209309"