IMT - Basic Intercom System Setup
From Zenitel Wiki
Contents
Overview
The procedure for deploying IP-intercom stations is
- Planning your system
- Discovery of intercom devices
- Identification of intercom devices and assigning a directory number
- Software upgrade
- Configuration
- Verifying configuration
A Wizard will guide you through the procedure.
Planning the installation
Plan your installation by collecting configuration data you would need to setup your system.
Planning an AlphaCom Installation
The table below is an example of data you would need for a typical AlphaCom IP intercom installation.
AlphaCom system parameters
| Parameter | Value |
|---|---|
| Station mode | AlphaCom |
| AlphaCom site 1 | 10.4.2.2 |
| IP gateway site 1 | 10.4.2.1 |
| IP address range site 1 | 10.4.2.x |
| IP network mask site 1 | 255.255.255.0 |
| AlphaCom site 2 | 10.7.2.2 |
| IP gateway site 2 | 10.7.2.1 |
| IP address range site 2 | 10.7.2.x |
| IP network mask site 2 | 255.255.255.0 |
AlphaCom system intercom information
| Dir. No. | Name | Location (Site) | IP configuration | MAC-address * | Host name | Other |
|---|---|---|---|---|---|---|
| 101 | Hans | B1, F1, R1 | 10.4.2.7 | 00:13:CB:01:5F:27 | Zenitel-101 | |
| 102 | Thomas | B1, F1, R2 | 10.4.2.8 | 00:13:CB:06:01:4C | Zenitel-102 | |
| 103 | Front door | B1, Main Entrance | 10.4.2.9 | 00:13:CB:00:AA:38 | Zenitel-103 | Noisy environment |
| 104 | Back door | B1, Back Door | 10.4.2.10 | 00:13:CB:00:1B:CA | Zenitel-104 | |
| 201 | Emil | B2, F3, R6 | DHCP | 00:13:CB:01:5F:28 | DHCP | |
| 202 | Frano | B2, F3, R8 | DHCP | 00:13:CB:06:01:45 | DHCP | |
| 203 | Lab | B2, Lab Entrance | DHCP | 00:13:CB:00:AA:39 | DHCP | |
| 204 | Datacenter | B2, Data Center | DHCP | 00:13:CB:00:1B:CE | DHCP |
*Note that you don’t need to obtain all the MAC addresses upfront. The AlphaCom directory report from the Discovery Wizard Finish step has MAC addresses in the directory list.
Planning a Pulse Installation
The tables below are examples of data you would require for a typical Pulse system installation.
Pulse system parameters
| Parameter | Value |
|---|---|
| Station mode | Pulse |
| Server site | 192.16.8.29 |
| IP gateway site | 192.16.8.1 |
| IP address range site | 192.16.8.x |
| IP network mask site | 255.255.255.0 |
Pulse system intercom information
| Dir. No. | Name | Location (Site) | IP configuration | MAC-address | Host name | Other |
|---|---|---|---|---|---|---|
| 101 | Reception | Reception | 192.16.8.29 | 00:13:cb:00:32:d0 | Flush Master | IP Master Station |
| 102 | John Smith | Head Office | DHCP | 00:13:cb:02:5d:94 | Desk Master | IP Desktop Station |
| 103 | Peter Brink | Head Office | DHCP | 00:13:cb:02:5c:8e | Desk Master | IP Desktop Station |
| 201 | Entrance | Main Entrance | DHCP | 00:13:cb:06:3a:3e | TCIV-3 | IP Substation |
| 202 | Elevator | Main Hall | DHCP | 00:13:cb:08:00:fe | TMIS-1 | IP Substation |
| 301 | Office 1 | 1st floor | DHCP | 00:13:cb:06:of:9e | TCIS-5 | IP Substation |
| 302 | Office 2 | 2nd floor | DHCP | 00:13:cb:06:2a:54 | TCIS-4 | IP Substation |
| 303 | Office 3 | 3rd floor | DHCP | 00:13:cb:06:06:22 | TCIS-6 | IP Substation |
Planning a SIP Installation
The tables below are examples of data you would require for a typical SIP IP intercom installation.
SIP system parameters
| Parameter | Value |
|---|---|
| Station mode | SIP |
| Server site | 192.16.8.100 |
| IP gateway site | 192.16.8.1 |
| IP address range site | 192.16.8.x |
| IP network mask site | 255.255.255.0 |
SIP system intercom information
| Dir. No. | Name | Location (Site) | IP configuration | MAC-address | Host name | Other |
|---|---|---|---|---|---|---|
| 101 | Reception | Reception | 192.16.8.29 | 00:13:cb:00:32:d0 | Flush Master | IP Master Station |
| 102 | John Smith | Head Office | 192.16.8.18 | 00:13:cb:02:5d:94 | Desk Master | IP Desktop Station |
| 103 | Peter Brink | Head Office | 192.16.8.19 | 00:13:cb:02:5c:8e | Desk Master | IP Desktop Station |
| 201 | Entrance | Main Entrance | 192.16.8.32 | 00:13:cb:06:3a:3e | TCIV-3 | IP Substation |
| 202 | Elevator | Main Hall | 192.16.8.34 | 00:13:cb:08:00:fe | TMIS-1 | IP Substation |
| 301 | Office 1 | 1st floor | 192.16.8.35 | 00:13:cb:06:of:9e | TCIS-5 | IP Substation |
| 302 | Office 2 | 2nd floor | 192.16.8.36 | 00:13:cb:06:2a:54 | TCIS-4 | IP Substation |
| 303 | Office 3 | 3rd floor | 192.16.8.39 | 00:13:cb:06:06:22 | TCIS-6 | IP Substation |
Station Discovery and Upgrade Wizard
Once the system has been planned it is time to start IMT and run the Wizard.