ENA2060 Amplifier

ENA2060-DC amplifier

The ENA2060 Network Amplifier for Rolling Stock incorporates SIP-addressable loudspeaker loops that enable the use of the same software for handling both Passenger Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train Radio Integration, thus eliminating one entire subsystem from the solution.
This results in a well-integrated system with less complexity and more functionality, while the use of open standards offers freedom of choice when it comes to future upgrades and supply.

2 different ENA2060 models are available.

• ENA2060-DC1 uses a 110 VDC power source
• ENA2060-DC2 uses a 24-48 VDC power source

Installation, Mounting and Dimensions

• Mounting and Installation
• Dimensions

Configuration

• Basic Configuration
• Web interface
• Speaker Line Monitoring
• Automatic Configuration using TFTP

Software Upgrade

Software upgrade of the ENA2060 amplifier is done in the same way as Turbine Intercom stations.

• Upgrade using the web interface of the amplifier
• Upgrade using the IMT tool

Load Factory Default values:

• Factory Default values can be restored by shorting pins 7 and 13 in the Multi-Connector during boot and following the directions for TKIS Restore Factory Defaults
• Factory Default values can also be loaded via the web interface of the amplifier, from the Main > Recovery menu

Related Information

• ENA2060-DC1 Additional Documentation on Zenitel.com