MB-30G
From Zenitel Wiki
Highlights
- Electret Microphone, 2K ohm
- 5-pin DIN plug
- For use in Public Address and Talk-Back Systems
- Length: 446 mm
Installation
Insert the 5-pin DIN plug on the gooseneck microphone in the microphone connector socket on the ECPIR panel.
Configuration
- Log in to the station web interface
- Enable Advanced Configuration
- Navigate to Audio Settings. In the section Audio Inputs, set Internal Microphone = "Handheld Mic".
Make sure "No accessory" under Accessory in the ECPIR web interface.
Dimensions
