Zenitel Connect Pro 1.5 - Release Notes
From Zenitel Wiki
- Previous Release - Zenitel Connect Pro 1.4 - Release Notes
This article provides the release notes for Zenitel Connect Pro running on the ICX-510 hardware or in a Virtual Environment. The release notes for ZCP 1.5.x describe new features, improvements and issues fixed after ICX 1.4.x.
General information
The Zenitel Connect Pro software is available in four different packages:
- Zenitel_Connect_ICX_1.5.x.swu - Upgrade package for Zenitel Connect Pro running on ICX-510
- Zenitel_Connect_VMware_1.5.x.zip - Installation package for a fresh install of Zenitel Connect Pro running on VMWare
- Zenitel_Connect_VBox_1.5.x.zip - Installation package for a fresh install of Zenitel Connect Pro running on Virtual Box
- Zenitel_Connect_ICX_prod_icx510_1.5.0.zip - Software used for changing an ICX-510 from running ICX-AlphaCom to run Zenitel Connect Pro, or recovery after a system crash.
There is also an excel template file for easy importing: Zenitel Connect Excel Template 1.12
Version 1.5.0
Release info
Name: See "General Information" section
ICX Version: 1.5.0
Date: 05.03.2025
Status: General Availability
Compatibility: Compatible with device software version 9.1.3.2. Compatible with Zenitel PAVA Vipedia-12 running Vipedia SW bundle 5.1.4.0P
New features
- Possibility to add IP-telephony services in Zenitel Connect Pro
- Credentials handling has been expanded and updated
- Added support to initiate Tone test and Button test from Zenitel Connect Pro
- Communication to devices is now encrypted
- Reworked logging system and added syslog
- Node red is released on VM and in preview for ICX 510
Fixes issues
ZEN-866 Could not open door on an AlphaCom station from Zenitel Connect Pro
When the call came from an AlphaCom door station, the door could not always be opened by a Zenitel Connect operator
ZEN-862 When entering an incomplete or wrong PIN code on TEIV-1+ the tone would not time out
The tone will now time out after 4 seconds, and the station will return to idle.
ZEN-823 Users might be logged off after a timeout of 30 minutes
Automatic log off should be after 30 minutes of inactivity. This was 30 minutes after log in. This is now fixed.
ZEN-819 Scanning did not complete
Scanning for devices would not complete if the page was not in focus. This is fixed.
ZEN-764 Replaced device was not Configured after reassigning dirno of old device
It required a new scan to get the device to show as configured. This is now not necessary anymore.
ZEN-650 Hostname change required reboot
Changing the host name of Zenitel Connect Pro was only visible in the GUI and stored in the database. To make the system use the hostname required a reboot. This is no longer necessary.
Known issues
ZEN-862 If not entering a complete PIN code on TEIV-1+ the tone will continue until completed or X is pressed
ZEN-823 Users might be logged off after a timeout of 30 minutes and need to log in again
ZEN-819 Scan and Pair doesn't pair if browser is not in focus
ZEN-779 When ZCP is run on virtual machines, if more network interfaces are added IP’s can be lost and ZCP becomes unreachable
ZEN-764 When replacing a device, pressing scan again is needed
ZEN-757 Broadcast is not working if the caller is member of the broadcast group
ZEN-752 Several PAVA functions require the use of # and *, which is only present on ITSV keyboards
ZEN-732 The status field for a PAVA account does not show any status of the connection
ZEN-650 A reboot is required after host name change for the change to take effect. This also affects the system name
ZEN-562 Display text can show %40 instead of @
ZEN-540 After restore you have to scan and pair to get the devices connected again
ZEN-114 When the static IP-address of Zenitel Connect is changed, the system needs to be reconfigured
PAVA-260 If the PAVA configuration contains an account with a zone that doesn’t exist, announcements cannot be made