TCIV+ Software Upgrade

This article describes how to upgrade the software of Zenitel Devices and IP Speakers via the web interface of the device.

This procedure is applicable to the devices based on the following technology:

• Devices based on the iMX6 processor
• Devices based on the iiMX8 processor.
• Devices based on the iMX8M Nano processor.
• Zenitel Display Series.

If you want to upgrade Turbine station models TCIV or TCIS go to Turbine Software Upgrade

For mass upgrade of stations it is recommended to use the VS-IMT tool, see the article IMT - Discover & Upgrade.

Upgrade procedure

1. Download the package and store the files in a folder on your laptop.
2. Log on to the device web interface. Default login credentials are admin and alphaadmin. Select Station Administration > Manual Upgrade
3. Drag and drop the software packaged in the Software Update window. Alternatively, you can click inside the Software Update window and browse for the file. The software package will be uploaded. The time it takes to upload will depend on the network connection.
4. After the software package is uploaded to the device, the same will be used to upgrade the device
5. When the upgrade process is finished, the station will be rebooted

Software upgrade

Dual partitions

The devices covered by this article comes with Dual Partitions, which allows for:

• Software upgrade in IPv6 network
• Software upgrade when device is using 802.1X authentication

The two partitions are called A and B. The information page shows which one is currently active:

Main > Information shows which of the two partitions that is currently active

When upgrading the firmware, the partition which is currently not in use will be updated. When the update is finished, the device will restart using the newly updated partition.

If for some reason the newly updated partition doesn't work properly, it is possible to roll back to the other partition:

Rollback to the other partition