Transparent Mode DAK-Key Configuration

When making an external call from AlphaCom out on a SIP trunk (or to a station type PNCI), the dialed digits are sent transparent through the AlphaCom, out on the SIP Trunk.

However, there might be a need to let the AlphaCom handle the digits, for example if one wants to make a call transfer (2 + intercom number + 3) or blind transfer after the telephone call has been established.

By default DAK key 8 (counted from 0!) is used for switching off "transparent mode" when calling from analog (ASLT) stations.
By default DAK key 3 is used when calling from IP stations.

The DAK key used for switching to transparent mode conversation to SIP station/trunk can be configured by:

 .ex_profile.glob_const.trans_mode_dak = 8 (0x08)

Default DAK key are 8 (counted from 0) <br\> DAK keys 0 and 1 is reserved for * and # thus can not be used.

Configuration from AlphaPro Event Handler

(Use System Status Event related to device 65 )

$SNV Q(DAK key) W1 W2 W21

DAK key = 2 to 9

Back to Feature description