Actions

Simplex Conferences (AlphaPro)

From Zenitel Wiki

Revision as of 09:29, 21 November 2008 by Roarl (talk)
Simplex Conferences.png
Conference Number Reflects the choice highlighted in the listbox to the left
Description Here you enter the conference name, 32 characters available. The name is used in the listbox to the left. The information is not transferred to the exchange, but stored in the PC file
Default Member The selected station is always connected as a member of the conference. This can be used to include mobile radio systems or external conference bridges/systems in a conference
Default Member is Default Speaker ON:
  • The conference listens to the default member when no M-keys are pressed

OFF:

  • No audio when no M-keys are pressed
Minimum Talk Priority Four levels are available:
  • Low
  • Medium
  • High
  • Alarm

Each station has a Talk Priority which must be equal or higher than this setting (else the station can only listen to the conference).

Conference over Conversation/AlphaNet Setup Priority ON:
  • Alarm priority: The conference seizes any necessary resources during setup in an AlphaNet installation. The conference remains on during ordinary conversations

OFF:

  • Description Missing
AlphaNet Global Conference ON:
  • The conference is a global conference. All exchanges to be involved in the same global conference and any transit nodes must have the same setting for the conference

OFF:

  • Local conference in this exchange (even if nodes in same AlphaNet uses it as a global conference)