Difference between revisions of "1-4j. RCO, Call indication (practice)"

Latest revision as of 16:14, 29 June 2016

System configuration

Private Ringing indication

When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).
The lamp should be turned off when the private ringing stops.
Use logical RCO 10 to operate the relay

Call Queue indication

When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present").
The lamp should be turned off when there are no more calls in the queue.

@@ Line 2: / Line 2: @@
 <br style="clear:both;" />
 === Exercise ===
-'''Call indication'''
+'''Private Ringing indication'''
-*When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard is in “Private” mode).
+*When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).
 *The lamp should be turned off when the private ringing stops.
 * Use logical RCO 10 to operate the relay
+'''Call Queue indication'''
+*When the Main Guard receives a '''Call Request''', the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "''Priority Mail Present''").
+*The lamp should be turned off when there are no more calls in the queue.
@@ Line 13: / Line 19: @@
 ===Related articles ===
-* [[1-4h. RCO, Call indication (solution)]]
+* [[1-4j. RCO, Call indication (solution)]]
 [[Category: AlphaCom practice]]