Difference between revisions of "AMC-IP software upgrade (Black AMC-IP board)"
From Zenitel Wiki
Line 1: | Line 1: | ||
{{A}} | {{A}} | ||
[[Image:AMC Black.PNG|thumb|250px|AMC-IP Processor Board (Black)]] | [[Image:AMC Black.PNG|thumb|250px|AMC-IP Processor Board (Black)]] | ||
− | This article describes how to upgrade the software | + | This article describes how to upgrade the software in an AlphaCom server, running a black AMC-IP board (hardware revision 5 or later). |
This is the currently produced AMC-IP board. It replaced the [[AMC-IP - AlphaCom Processor Board (Red)|red AMC-IP board]] (hardware revision 4) in 2010. | This is the currently produced AMC-IP board. It replaced the [[AMC-IP - AlphaCom Processor Board (Red)|red AMC-IP board]] (hardware revision 4) in 2010. | ||
− | + | The software 12.5.3.0 is supported only on the black AMC IP boards. The red AMC-IP board is not supported. | |
Revision as of 15:52, 29 May 2018
This article describes how to upgrade the software in an AlphaCom server, running a black AMC-IP board (hardware revision 5 or later).
This is the currently produced AMC-IP board. It replaced the red AMC-IP board (hardware revision 4) in 2010.
The software 12.5.3.0 is supported only on the black AMC IP boards. The red AMC-IP board is not supported.
Backup customer data
Configuration data will get lost after the upgrade.
The customer data MUST be backed up by doing a GetAll operation from AlphaPro before the upgrade is performed.
Software Upgrade
- Download the file bsp_32.00.3.1_AS_12.3.3.2.apkg. This file contains the AMC-IP software version 12.3.3.2, as well as security updates.
- Use an internet browser and log on to the AlphaCom Web interface (AlphaWeb) and select System Maintenance -> System Upgrade.
- Browse to the downloaded file, and select Upload. The file will now be transferred from the PC to the AMC-IP board.
- When the upload is finished an Install button will appear. Press the Install button, the upgrade status is shown in the web browser.
- When the software installation is finished the system will restart with the new software.
Restore customer data
Restore the customer data by doing a SendAll operation from AlphaPro. Reset the exchange when the SendAll is finished.