Actions

AMC-IP software upgrade (Black AMC-IP board)

From Zenitel Wiki

Revision as of 14:23, 4 May 2023 by Asle (talk | contribs) (Software Upgrade)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
AlphaCom icon 300px.png
AMC-IP Processor Board (Black)

This article describes how to upgrade the software in an AlphaCom server, running a black AMC-IP board (hardware revision 5 or later).

This is the currently produced AMC-IP board. It replaced the red AMC-IP board (hardware revision 4) in 2010.

The software 12.5.3.4 and software 13.1.3.13 are supported only on the black AMC IP boards. The red AMC-IP board is not supported.


Backup customer data

Configuration data will get lost after the upgrade.

The customer data MUST be backed up by doing a GetAll operation from AlphaPro before the upgrade is performed.

Software Upgrade

  • For AMC 12.5.3.4: Download the file bsp_32.00.3.1_AS_12.5.3.4.apkg. This file contains the AMC-IP software version 12.5.3.4, as well as security updates.
  • For AMC 13.1.3.13: Please Download and install BSP 32.3.3.11 first! Download the file alpha-sys_13.1.3.13.apkg. This file contains the AMC-IP software version 13.1.3.13.
  • Use an internet browser and log on to the AlphaCom Web interface (AlphaWeb) and select System Maintenance -> System Upgrade.
  • Browse to the downloaded file, and select Upload. The file will now be transferred from the PC to the AMC-IP board.
Browse and Upload the new firmware


  • When the upload is finished an Install button will appear. Press the Install button, the upgrade status is shown in the web browser.
  • When the software installation is finished the system will restart with the new software.

Restore customer data

Restore the customer data by doing a SendAll operation from AlphaPro. Reset the exchange when the SendAll is finished.