Difference between revisions of "APC - AlphaCom Program & Clock Board"
From Zenitel Wiki
| Line 1: | Line 1: | ||
[[Image:9301 RS.jpg|thumb|250px]] | [[Image:9301 RS.jpg|thumb|250px]] | ||
| − | + | == Highlights == | |
| − | |||
| − | |||
| − | |||
| − | == | ||
* System master clock (two-phase - 16.384 Mhz) and module reset | * System master clock (two-phase - 16.384 Mhz) and module reset | ||
* Circuitry for 6 audio program feed channels | * Circuitry for 6 audio program feed channels | ||
| Line 13: | Line 9: | ||
* 6 alarm inputs | * 6 alarm inputs | ||
* 2 internal alarms | * 2 internal alarms | ||
| − | |||
* Fan control | * Fan control | ||
* Coded connector to ensure correct positioning in the module | * Coded connector to ensure correct positioning in the module | ||
* Power connector (6-pin socket source) for [[hot-plug|hot plug-in]] cable | * Power connector (6-pin socket source) for [[hot-plug|hot plug-in]] cable | ||
| + | * Reset button in front | ||
| + | ==Additional Documentation== | ||
| + | For more documentation please see http://www.zenitel.com/product/product/alphacom-program-clock-board-apc | ||
| − | = | + | [[image:APC board, connection and adjustment.jpg|thumb|left|500px|APC board, connection and adjustment]] |
| + | <br style="clear:both;" /> | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[[Category:Hardware]] | [[Category:Hardware]] | ||
[[Category:Feature boards]] | [[Category:Feature boards]] | ||
Revision as of 13:11, 7 August 2015
Highlights
- System master clock (two-phase - 16.384 Mhz) and module reset
- Circuitry for 6 audio program feed channels
- Can be fed by any analog source
- Galvanic isolated input via 600 ohm transformer to avoid noise problems
- Adjustable sensitivity (gain)
- 6 alarm inputs
- 2 internal alarms
- Fan control
- Coded connector to ensure correct positioning in the module
- Power connector (6-pin socket source) for hot plug-in cable
- Reset button in front
Additional Documentation
For more documentation please see http://www.zenitel.com/product/product/alphacom-program-clock-board-apc
