Difference between revisions of "APC - AlphaCom Program & Clock Board"
From Zenitel Wiki
(→Additional Documentation) |
|||
Line 15: | Line 15: | ||
==Additional Documentation== | ==Additional Documentation== | ||
− | For more documentation please see http://www.zenitel.com | + | For more documentation please see http://www.zenitel.com/product/alphacom-program-clock-board-apc |
[[image:APC board, connection and adjustment.jpg|thumb|left|500px|APC board, connection and adjustment]] | [[image:APC board, connection and adjustment.jpg|thumb|left|500px|APC board, connection and adjustment]] |
Revision as of 15:35, 4 January 2016
Highlights
- System master clock (two-phase - 16.384 Mhz) and module reset
- Circuitry for 6 audio program feed channels
- Can be fed by any analog source
- Galvanic isolated input via 600 ohm transformer to avoid noise problems
- Adjustable sensitivity (gain)
- 6 alarm inputs
- 2 internal alarms
- Fan control
- Coded connector to ensure correct positioning in the module
- Power connector (6-pin socket source) for hot plug-in cable
- Reset button in front
Additional Documentation
For more documentation please see http://www.zenitel.com/product/alphacom-program-clock-board-apc