Difference between revisions of "APC - AlphaCom Program & Clock Board"
From Zenitel Wiki
| Line 1: | Line 1: | ||
[[Image:1009301000.PNG|thumb|250px]] | [[Image:1009301000.PNG|thumb|250px]] | ||
| − | == | + | ==Highlights== |
* System master clock (two-phase - 16.384 Mhz) and module reset | * System master clock (two-phase - 16.384 Mhz) and module reset | ||
* Circuitry for 6 audio program feed channels | * Circuitry for 6 audio program feed channels | ||
| Line 14: | Line 14: | ||
* Reset button in front | * Reset button in front | ||
| − | + | * [http://www.zenitel.com/product/alphacom-program-clock-board-apc Additional Documentation on Zenitel.com] | |
[[image:APC board, connection and adjustment.jpg|thumb|left|500px|APC board, connection and adjustment]] | [[image:APC board, connection and adjustment.jpg|thumb|left|500px|APC board, connection and adjustment]] | ||
Revision as of 19:38, 10 May 2017
Highlights
- System master clock (two-phase - 16.384 Mhz) and module reset
- Circuitry for 6 audio program feed channels
- Can be fed by any analog source
- Galvanic isolated input via 600 ohm transformer to avoid noise problems
- Adjustable sensitivity (gain)
- 6 alarm inputs
- 2 internal alarms
- Fan control
- Coded connector to ensure correct positioning in the module
- Power connector (6-pin socket source) for hot plug-in cable
- Reset button in front
