Audio Programs (AlphaPro)

From the Audio Program menu you can modify the properties of the Audio Program Distribution. See also Main article: Audio Program

The Audio Programs button

Audio Program Settings tab

• Program Number: The Audio Program number, 1-70
• Description: The name you enter here is displayed in the listbox to the left. Note that this text is not transferred to the AlphaCom server, but is stored locally on the PC only.
• Program over Conversation
  • Disabled (default): The audio program is muted during conversation
  • Enabled: The audio program is mixed with the conversation audio

• Volume/Handset override
  • ON: Activates the handset and volume override function for display stations when the program is set up to a group of stations (75 + group + program).
  • OFF: Normal, no override - This is the default seting.

General Settings

AlphaPro 11.5

From AlphaPro 10.42

AlphaPro 10.40 and earlier

In General Settings, the two Audio Program Step sequences are defined.

A station can step through an audio sequence by dialling the relevant directory number, by default 790 for stepping up through the sequence and 791 for stepping down.

The step sequence defines the length of sequence:

• Sequence 1 - Default 6 first programs (801-806)
• Sequence 2 - Default 3 first programs (801-803)

|Audio Program feed in master||When this flag is enabled Audio Programs need only to be connected to the master in a MultiModule. When the flag is disabled Audio Program must be connected in parallel to all modules, as before. Exchange reset is needed after changing the flag. |-valign="top" For each station individually it is possible to define which sequence will be used.

From AlphaPro 10.42 programs can be chosen freely, as opposed to the consecutive order in the previous version.