Difference between revisions of "CALL SETUP"
From Zenitel Wiki
| Line 29: | Line 29: | ||
64: Used internally for transfer call, answer group call (CSF_TRANSFER_CALL) Forces both A and B stations.<BR\> | 64: Used internally for transfer call, answer group call (CSF_TRANSFER_CALL) Forces both A and B stations.<BR\> | ||
128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03) <br> | 128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03) <br> | ||
| − | 256: Start a silence call to an IP station. No LED or loudspeaker turned on the B party. (AMC 11.02) | + | 256: Start a silence call to an IP station. No LED or loudspeaker turned on the B party. (AMC 11.02.03.01) |
| + | 512: Force Fixed Open Duplex mode (M key an Hook does not affect the Open Duplex conversation) (AMC 11.02.03.02) | ||
|- | |- | ||
|align=center|4||[[UINT1]]<BR\>(optional)||colspan="3"|Allocation priority of A station. Zero or omitted means that the NVRAM priority of A station is used,[[Users & Stations (AlphaPro)]]. Priority 4 gives [[Busy override]] of A station. Priority 1,2,3 gives normal allocation. | |align=center|4||[[UINT1]]<BR\>(optional)||colspan="3"|Allocation priority of A station. Zero or omitted means that the NVRAM priority of A station is used,[[Users & Stations (AlphaPro)]]. Priority 4 gives [[Busy override]] of A station. Priority 1,2,3 gives normal allocation. | ||
Revision as of 12:35, 14 July 2011
| CALL_SETUP | 0x0008 | 8 | AMC 08.20 | |
|---|---|---|---|---|
| $CALL L101 L102 $CALL L101 L102 W32 $CALL L101 L102 W64 $CALL L101 L102 W0 0 1 |
Let 101 call 102 Let 101 call, ignore if 102 forwards Let 101 call 102, force both 101 and 102 Let 101 call 102, force private ringing | |||
$CALL_SETUP sets up a conversation like dialing from a station. Default behavior:
$CONN_REQUEST/$CONN is retained for compatibility only, CALL_SETUP is the preferred message now. | ||||
| 1 | NET_OBJ_REF<br\>{ECL_STATION, <BR\> ECL_USER} | A - user or station. | ||
| 2 | NET_OBJ_REF <br\>{ECL_STATION, <BR\> ECL_USER, ECL_O_DUPL_CONF} | B - user or station or Duplex_Conference | ||
| 3 | UINT2<br\>(optional) | Call mode options (default zero)<br\>Call mode options can be the sum of the following:<BR\>
1: Return CONN_REFERENCE, STATION_DOWN or STATION_BUSY. Send DISCONNECTED at disconnect (CSF_RETURN_ACK)<BR\>
2: Require CONN_REF_ACK and DISCONNECTED_ACK (CSF_3WAY_ACK)<BR\>
4: Reserved<BR\>
8: This is a transfer of a billed call. Param#6 then carries the nodenumber of the billing node<BR\>
16: Do not disconnect A station if busy (CSF_NOT_FORCE_A)<BR\>
32: Do not follow call forwarding (CSF_NO_FORWARD)<BR\>
64: Used internally for transfer call, answer group call (CSF_TRANSFER_CALL) Forces both A and B stations.<BR\>
128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03) | ||
| 4 | UINT1<BR\>(optional) | Allocation priority of A station. Zero or omitted means that the NVRAM priority of A station is used,Users & Stations (AlphaPro). Priority 4 gives Busy override of A station. Priority 1,2,3 gives normal allocation. | ||
| 5 | UINT1<br\>(optional) | Call priority towards B station. Value 1 - 4. Value zero or omitted means that the NVRAM priority of A station is used, Users & Stations (AlphaPro). | ||
| 6 | NET_OBJ_REF<br\>{ECL_STATION}<br\>(optional) | B Station if User B is not at own station. | ||
| Response | CONN_REFERENCE, STATION_DOWN or STATION_BUSY, or none | |||