Difference between revisions of "FCDC-3 - Backwards compatibility"
From Zenitel Wiki
| Line 1: | Line 1: | ||
The [[FCDC-3]] is '''fully compatible''' with [[FCDC-1]], [[FCDC-2]] (including [[:Category:Stations#Turbine_stations|TFIX stations]] and [https://exigo.zenitel.com/wiki/Category:Ex_Access_Panels Exigo Ex Access Panels]) after these devices have been [[Flowire Software Upgrade Procedure|upgraded]] to '''software version 4.1.3.13''' or newer. | The [[FCDC-3]] is '''fully compatible''' with [[FCDC-1]], [[FCDC-2]] (including [[:Category:Stations#Turbine_stations|TFIX stations]] and [https://exigo.zenitel.com/wiki/Category:Ex_Access_Panels Exigo Ex Access Panels]) after these devices have been [[Flowire Software Upgrade Procedure|upgraded]] to '''software version 4.1.3.13''' or newer. | ||
| − | * If these devices are running version '''4.1.3.12 or older''', there will be no compatibility. There will be no connection between the FCDC-3 and | + | * If these devices are running version '''4.1.3.12 or older''', there will be no compatibility. There will be no connection between the FCDC-3 and these devices. |
Revision as of 15:11, 31 January 2020
The FCDC-3 is fully compatible with FCDC-1, FCDC-2 (including TFIX stations and Exigo Ex Access Panels) after these devices have been upgraded to software version 4.1.3.13 or newer.
- If these devices are running version 4.1.3.12 or older, there will be no compatibility. There will be no connection between the FCDC-3 and these devices.
If you mix software version 4.1.2.12 (or older) and version 4.1.2.13 (or newer) on the same Flowire network, there will be limited compatibility. They will connect and let you do software upgrade, but regular operations will not work.
|
Updating EX-stations to version 4.1.2.13 must be done by using a FCDC2 |