Revision as of 13:17, 29 May 2018

VSF-INCA 2.8

Release info

Name: VSF-INCA
Description: VSF-INCA is a firmware archive for all INCA based Intercom stations including devices: IP Desktop Master Station, IP Substation, IP Vandal Resistant Station, IPARIO and IP Dual Display Station.
The firmware is delivered in two different ZIP archives:

A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
A100G802D0.02_08_X_X - Used for IP Dual Display Station

Version: 02.08.2.1
Date: 20.03.2018
Status: Limited Availability (LA)
Note: Release notes for the Video module component in IP Desktop Station with Video Display (1408001635) can be found in separate document on Vingtor-Stentofon AlphaWiki page IP Desktop with Video Display - Release Notes

New Features 2.8.2.1 (LA)

None

Bugfixes and Improvements 2.8.2.1 (LA)

SNOW-240 StationWeb - inconsistent location of Keyboard Settings page

Renamed the page to "Keyboard Settings" and moved it to SIP Configuration - for Pulse and SIP mode

MTN-408 802.1X config not properly handling special characters in password

Characters like !#$%&/()=@* are now handled in the password input field for 802.1x.

Security fixes and Improvements 2.8.2.1 (LA)

None

Known Issues 2.8.3.0

MTN-1052 PTT does not work between Gateway and INCA station

Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA. If call is made between Turbine and Gateway, PTT works as expected.

MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C

When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.

MTN-817 IP Video Desktop does not indicate private/open mode

There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.

MTN-482 Transfer function doesn't work with Cisco CCM

When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.

MTN-598 IP station fails to register if Hebrew name is too long

More than 12 characters entered causes registration problems

MTN-268 Relay follow M-key cannot handle quick M

Relay configured to follow M-key does not handle quick press on M-key

@@ Line 26: / Line 26: @@
 None
-==Known Issues 2.8.2.1 (LA)==
+==Known Issues 2.8.3.0==
-=== MTN-394 INCA Station does not receive group call audio while speaking into a Simplex Conference===
-INCA IP Station does not receive group call audio while speaking (M-key pressed) into a Simplex Conference, or if it is a Default Speaker of a SX conference.
-=== MTN-817 IP Video Desktop does not indicate private/open mode===
-There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
 === MTN-1052 PTT does not work between Gateway and INCA station===
 Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA.
@@ Line 39: / Line 33: @@
 === MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C===
 When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.
+=== MTN-817 IP Video Desktop does not indicate private/open mode===
+There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
 === MTN-482 Transfer function doesn't work with Cisco CCM===

Difference between revisions of "INCA 2.8 - Release Notes"

From Zenitel Wiki