Actions

INCA IP DualDisplay Station - Restore Factory Defaults

From Zenitel Wiki

Revision as of 16:55, 16 March 2017 by Asle (talk) (Created page with "{{APS}}This procedure is the recommended procedure for all IP Stations with Display. The Station Menu is available when the IP Station is in offline mode. i.e. not registered...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
APS.png

This procedure is the recommended procedure for all IP Stations with Display.

The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server.

  • Make sure the IP Station is disconnected from the AlphaCom XE exchange.
  • Press the Setup button beneath the display
  • Enter the password 1851 and press the Ok button.
  • Navigate to Load defaults and press the Sel button.
  • Press the Sel button to load factory defaults.
Load Defaults in IP Display Station - 1.PNG
Load Defaults in IP Display Station - 2.PNG

The station will now restart with factory settings. 


The IP DualDisplay station can also be restored through an alternative procedure.
Retrieved from "https://wiki.zenitel.com/w/index.php?title=INCA_IP_DualDisplay_Station_-_Restore_Factory_Defaults&oldid=151945"