Difference between revisions of "IP-LCM"

Revision as of 15:13, 17 April 2019

IP Line Connection Module ( 1008095201)

The IP-LCM module is an expansion to the TKIS-2, and adds high power relays and robust control inputs to the kit without extra wiring.
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.

8 relay outputs
8 control inputs
Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
Device powered via the TKIS-2 kit using PoE or local power
All TKIS-2 features available

Software requirements

The IP-LCM is fully supported as from ver 4.11.

Getting started

Configuration

AlphaCom mode

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Additional Documentation on Zenitel.com

Additional Documentation on Zenitel.com

@@ Line 19: / Line 19: @@
 == Configuration ==
-* The IP-LCM is configured in the same way as other Turbine devices, see [[Turbine Configuration - AlphaCom mode|Turbine configuration]] <br>
+* [[IP-LCM Configuration (AlphaCom mode)|AlphaCom mode]]
-* The 8 inputs of the IP-LCM module are triggering [[Station Input or Station DAK key (Event Type)|30 - Station Input or Station DAK key]], DAK/Input 18-25. See [[RCI_-_Remote_Contol_Input#Inputs_from_IP_Stations.2FDevices|RCI configuration]]
-* The 8 relays must be mapped to RCO pins 17-24, see [[RCO - Remote Control Output]]
 == Restore Factory Defaults and Software Upgrade ==