Difference between revisions of "IP-LCM"
From Zenitel Wiki
m |
(→Configuration) |
||
| Line 17: | Line 17: | ||
== Configuration == | == Configuration == | ||
| − | + | The IP-LCM is configured in the same way as for the Turbine in general. | |
| + | [[Turbine Configuration - AlphaCom mode|AlphaCom mode]] | ||
| + | The control inputs on the IP-LCM module is configured to RCI 17-24. | ||
| + | The control outputs are mapped to pins 17-24. | ||
== Restore Factory Defaults and Software Upgrade == | == Restore Factory Defaults and Software Upgrade == | ||
Revision as of 15:09, 10 December 2018
The IP-LCM module is an expansion to the TKIS-2 that adds high power relays and robust control inputs to the kit without extra wiring.
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.
- 8 relay outputs
- 8 control inputs
- Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
- Device powered via the TKIS-2 kit using PoE or local power
- All TKIS-2 features available
Exigo and AlphaCom are supported.
Contents
Getting started
Configuration
The IP-LCM is configured in the same way as for the Turbine in general. AlphaCom mode The control inputs on the IP-LCM module is configured to RCI 17-24. The control outputs are mapped to pins 17-24.