Difference between revisions of "IP Heavy Duty Station"

Latest revision as of 13:30, 26 June 2023

This product is discontinued!

The IP Heavy Duty Station comes in different variants regarding door and keyboard

This product is replaced by 1008472xxx IP Heavy Duty Station V2

Connections

Station connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

General configuration:

Station specific configuration for the IP Heavy Duty station:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Software Requirements

This station is fully supported as form AlphaCom version 10.20

Related information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{APS}}
+{{AEIPS}}
+{{Obsolete}}
 [[File:IP HeavyDuty.png|thumb|350px|The IP Heavy Duty Station comes in different variants regarding door and keyboard]]
-The IP HeavyDuty Station comes in different variants regarding door and keyboard.
+This product is replaced by [[IP Heavy Duty Station V2|1008472xxx IP Heavy Duty Station V2]]
-===<u>[[IP Heavy Duty Connections|InterCom connections]]</u>===
+== Connections ==
+* [[IP Heavy Duty Connections|Station connections]]
-===<u>Configuration</u>===
+==Configuration==
-* [[Configuration guide for IP Heavy Duty|IP Station Configuration]]
+The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
-* [[IEEE 802.1Q|VLAN (IEEE 8021Q)]]
-* [[IEEE 802.1X|Network Access Control (802.1X)]]
-* [[Active Noise Cancelling|Noise Reduction]]
-===<u>[[INCA Station Software upgrade|Software Upgrade]]</u>===
+General configuration:
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
+* [[Adding station to existing system (Edge)|Edge mode]]
+* [[SIP Intercom - Web Interface|SIP mode]]
+* [[IP Station Configuration - Pulse mode|Pulse mode]]
-===<u>[[INCA Substation PCB LED Indicators|PCB LED Indications]]</u>===
+Station specific configuration for the IP Heavy Duty station:
+* [[Configuration guide for IP Heavy Duty|Configuration of IP Heavy Duty station - AlphaCom mode]]
+* [[Configuration guide for IP Heavy Duty (Pulse)|Configuration of IP Heavy Duty station - Pulse mode]]
+* [[Configuration guide for IP Heavy Duty (SIP)|Configuration of IP Heavy Duty station - SIP mode]]
-===<u>[[INCA Substation Board Connectors|Board Connectors]]</u>===
+== Restore Factory Defaults and Software Upgrade ==
+* [[IP Heavy Duty - Restore Factory Defaults|Restore factory default settings]]
+* [[INCA Station Software upgrade|Upgrade via the station web interface]]
+* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
+* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
-===<u>[[IP Heavy Duty station Dimensions & Mounting Instructions|Dimensions]]</u>===
+== Connectors, Indicators and Dimensions ==
+*[[INCA Substation Board Connectors|Board Connectors]]
-===<u>[[INCA Station Restore Factory Defaults|Reset to factory settings]]</u>===
+*[[INCA Substation PCB LED Indicators|PCB LED Indications]]
+*[[IP Heavy Duty station Dimensions & Mounting Instructions|Dimensions]]
-===<u>[http://www.zenitel.com/product/ip-heavy-duty-telephone-door-full-keyboard Additional Documentation on Zenitel.com]</u>===
+== Software Requirements ==
+This station is fully supported as form AlphaCom version 10.20
+== Related information ==
+* [http://www.zenitel.com/product/ip-heavy-duty-telephone-door-full-keyboard Additional Documentation on Zenitel.com]
 [[Category: INCA Stations]]
+[[Category: Discontinued Stations]]