Difference between revisions of "IP Substation - Additional DAK keys"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| − | The [[IP Substation Board Connection|IP substation board]] supports input for digits 0 - 9, 10 [[DAK|DAK-keys]], as well as [[M-key]] and [[C-key]]. | + | The [[IP Substation Board Connection|IP substation board]] supports input for digits 0 - 9, 10 [[DAK|DAK-keys]], as well as [[M-key]] and [[C-key]]. The inputs are available on soldering pads on the substation PCB. |
| − | The inputs are available on soldering pads on the substation PCB. | + | [[Image:IP sub test pad location.png|thumb|300px|Location of soldering pads]] |
| − | [[Image:IP sub test pad location.png|thumb|Location of soldering pads]] | ||
'''Inputs for DAK-keys, M- and C-key:''' | '''Inputs for DAK-keys, M- and C-key:''' | ||
---------------------------------- | ---------------------------------- | ||
Revision as of 14:17, 5 February 2009
The IP substation board supports input for digits 0 - 9, 10 DAK-keys, as well as M-key and C-key. The inputs are available on soldering pads on the substation PCB.
Inputs for DAK-keys, M- and C-key: ---------------------------------- DAK 1: N115 + N112 DAK 2: N115 + N113 DAK 3: N115 + N114 DAK 4: N105 + N110 DAK 5: N105 + N111 DAK 6: N105 + N112 DAK 7: N105 + N113 DAK 8: N105 + N114 DAK 9: N105 + N115 DAK 10: N106 + N110 ------------------- M-key: N115 + N111 C-key: N115 + N110
If more than 10 DAK keys are needed, it is possible to use the digit keys as DAK keys. This is enabled by the flag "Digit Key is DAK" in the Users & Stations > Station Type menu in AlphaPro. The regular DAK keys are then moved to DAK 11 - 20.
Inputs for digit keys: ---------------------- Digit 0: N111 + N110 Digit 1: N112 + N110 Digit 2: N112 + N111 Digit 3: N113 + N110 Digit 4: N113 + N111 Digit 5: N113 + N112 Digit 6: N114 + N110 Digit 7: N114 + N111 Digit 8: N114 + N112 Digit 9: N114 + N111
KEY0 = N110 KEY1 = N111 KEY2 = N112 KEY3 = N113 KEY4 = N114 KEY5 = N115 KEY6 = N105 KEY7 = N106 KEY8 = N107