Actions

IP Video Door Station - 1401110200

From Zenitel Wiki

Revision as of 12:53, 6 November 2014 by Roarl (talk) (Axis Factory Reset)
IP Video Station, item 1401110200

Camera Type: Axis

The STENTOFON Vandal Resistant IP Video Station (item 1401110200) is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance. Designed for CCoIP® the station offers a set of critical communication features such as integrated firewall, group call, call priority and over-ride, to name just a few. This enables you to deliver instant, efficient and secure voice, video and data services in an IP environment.

Installation

See article: IP Station Installation

Station Board Connectors and LED Indications

See article: IP Station Board Connections and Indications

IP Station Configuration

See article: IP Station Configuration

Reset to factory settings

See article: IP Station Restore Factory Defaults

Software Upgrade

See article: IP Station Software upgrade

Dimensions

See article: IP Stations Dimensions and Mounting Instructions

Camera configuration

Connect to the camera using a webbrowser on default IP address 169.254.1.101.

In the menu that appears, click System Settings, and you will be asked to login:

Username: admin
Password: 1234


Compability

This table descibes the camera specific settings that must be set depending on the receiver

Receiving unit Resolution Frame Rate Compression Other2 Comments
IP Video Desktop 320x240 Unlimited 30 xx yy
Cisco xxx xx xx xx xx yy
SNOM IP Phone xx xx xx xx yy
Grandstream xxx xx xx xx xx yy
PhonerLite SIP Client xx xx xx xx yy
DIVUS Videophone xx xx xx xx yy

These units have been tested and found to be not supported:

  • BRIA (CounterPath) SIP client
  • CPCAM viewer