Difference between revisions of "Private Ringing mode (Event Type)"
From Zenitel Wiki
(→Event description) |
|||
| Line 3: | Line 3: | ||
|- | |- | ||
|width="100pt"|'''Event Owner''': | |width="100pt"|'''Event Owner''': | ||
| − | |width=" | + | |width="400pt"|A station or an [[UDP]] group receiving ''incoming'' call |
|- | |- | ||
|'''Event type''': || 09 - Private Ringing Mode | |'''Event type''': || 09 - Private Ringing Mode | ||
| Line 11: | Line 11: | ||
|'''When change to ON''': || Ringing starts (private ringing call or call transfer ringing) | |'''When change to ON''': || Ringing starts (private ringing call or call transfer ringing) | ||
|- | |- | ||
| − | |'''When change to OFF''': || Ringing stops | + | |'''When change to OFF''': || Ringing stops (Because of conversation, time-out or C-key) |
|- | |- | ||
|'''When related to''': || The calling station | |'''When related to''': || The calling station | ||
Revision as of 21:26, 10 June 2015
Event description
| Event Owner: | A station or an UDP group receiving incoming call |
| Event type: | 09 - Private Ringing Mode |
| Subevent: | N/A |
| When change to ON: | Ringing starts (private ringing call or call transfer ringing) |
| When change to OFF: | Ringing stops (Because of conversation, time-out or C-key) |
| When related to: | The calling station |
Application
- - Additional call indication
- - CCTV control
Additional information
- - See also event "01 Audio - Private Ringing"
- - The event 09 stays ON as long as the station is ringing. It behaves differently from the event 01 Audio - Private ringing in two ways:
- - 01 Audio follows the ringing tone, i.e. is ON for 1,5 sec then OFF for 1,5 sec.
- - 01 Audio has no "Related to" information
- -33 Private Ringing Outgoing is the corresponding event, with the owner and related-to swapped.