Difference between revisions of "Private mode"
From Zenitel Wiki
| Line 2: | Line 2: | ||
Private mode can be set: | Private mode can be set: | ||
| − | * By selecting "Private" mode on the station. Most station types has a switch or jumper to set the station in Private mode. On IP stations one must press the C-button for 3 seconds. | + | * By selecting "Private" mode on the station. Most station types has a switch or a jumper on the circuit board to set the station in Private mode. On IP stations one must press the C-button for 3 seconds. |
* By enabling the [[Open / Private selection feature|Programable Open/Private]] in AlphaPro, then dial 7887 to set the station in Private mode. | * By enabling the [[Open / Private selection feature|Programable Open/Private]] in AlphaPro, then dial 7887 to set the station in Private mode. | ||
* By setting the [[Users_%26_Stations_(AlphaPro)#Station_Type|"Always Private"]] flag in AlphaPro | * By setting the [[Users_%26_Stations_(AlphaPro)#Station_Type|"Always Private"]] flag in AlphaPro | ||
Revision as of 10:05, 28 February 2013
When calls are made to a station in Private mode, the station will be ringing like a telephone, and the called user has to accept the call by pressing the M-key or lift the handset.
Private mode can be set:
- By selecting "Private" mode on the station. Most station types has a switch or a jumper on the circuit board to set the station in Private mode. On IP stations one must press the C-button for 3 seconds.
- By enabling the Programable Open/Private in AlphaPro, then dial 7887 to set the station in Private mode.
- By setting the "Always Private" flag in AlphaPro