Difference between revisions of "Private mode"
From Zenitel Wiki
Line 6: | Line 6: | ||
* By setting the [[Users_%26_Stations_(AlphaPro)#Station_Type|"Always Private"]] flag in AlphaPro | * By setting the [[Users_%26_Stations_(AlphaPro)#Station_Type|"Always Private"]] flag in AlphaPro | ||
− | [[File:Private mode.PNG|thumb| | + | [[File:Private mode.PNG|thumb|300px|right|Test of station in Private]] |
− | Note: | + | Note: When using the feature ''programmable private/open'', the current state (private or open) is stored in [[state data]], thus will be removed during "chilly reset". |
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] | ||
+ | |||
+ | <br style="clear:both;" /> |
Revision as of 10:16, 28 February 2013
When calls are made to a station in Private mode, the station will be ringing like a telephone, and the called user has to accept the call by pressing the M-key or lift the handset.
Private mode can be set:
- By selecting "Private" mode on the station. Most station types has a switch or a jumper on the circuit board to set the station in Private mode. On IP stations one must press the C-button for 3 seconds.
- By enabling the Programable Open/Private in AlphaPro, then dial 7887 to set the station in Private mode.
- By setting the "Always Private" flag in AlphaPro
Note: When using the feature programmable private/open, the current state (private or open) is stored in state data, thus will be removed during "chilly reset".