Difference between revisions of "Private mode"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| + | [[File:Private mode.PNG|thumb|300px|right|Test of station in Private]] | ||
When calls are made to a station in '''Private mode''', the station will be ringing like a telephone, and the called user has to accept the call by pressing the [[M-key]] or lift the handset. | When calls are made to a station in '''Private mode''', the station will be ringing like a telephone, and the called user has to accept the call by pressing the [[M-key]] or lift the handset. | ||
| Line 6: | Line 7: | ||
* By setting the [[Users_%26_Stations_(AlphaPro)#Station_Type|"Always Private"]] flag in AlphaPro | * By setting the [[Users_%26_Stations_(AlphaPro)#Station_Type|"Always Private"]] flag in AlphaPro | ||
| − | + | ||
Note: When using the feature ''programmable private/open'', the current state (private or open) is stored in [[state data]], thus will be removed during "chilly reset". | Note: When using the feature ''programmable private/open'', the current state (private or open) is stored in [[state data]], thus will be removed during "chilly reset". | ||
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] | ||
| − | |||
| − | |||
Revision as of 10:16, 28 February 2013
When calls are made to a station in Private mode, the station will be ringing like a telephone, and the called user has to accept the call by pressing the M-key or lift the handset.
Private mode can be set:
- By selecting "Private" mode on the station. Most station types has a switch or a jumper on the circuit board to set the station in Private mode. On IP stations one must press the C-button for 3 seconds.
- By enabling the Programable Open/Private in AlphaPro, then dial 7887 to set the station in Private mode.
- By setting the "Always Private" flag in AlphaPro
Note: When using the feature programmable private/open, the current state (private or open) is stored in state data, thus will be removed during "chilly reset".