Difference between revisions of "Redundancy"
From Zenitel Wiki
(Created page with "{{I}} This articles shows possible solutions for redundancy with the ICX-AlphaCom server. == Power Supply == The ICX-AlphaCom normally has one power supply, and it only suppo...") |
(→Serial Port) |
||
| Line 13: | Line 13: | ||
[[File:Redundant Power Supply ICX2.png|thumb|left|700px|Principal sketch for redundancy system]] | [[File:Redundant Power Supply ICX2.png|thumb|left|700px|Principal sketch for redundancy system]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| + | |||
| + | == RCO or RCI == | ||
| + | Any physical [[RCI|inputs]] and/or [[RCO|outputs]] needs to communicate with the server via an IP device such as the [[TKIS-2]] or an [[IP-LCM]]. These devices, as any other IP device in a redundant system must register and communicate with the operational IP address, and thus always be online with the active server. | ||
== Serial Port == | == Serial Port == | ||
Revision as of 14:44, 4 March 2022
This articles shows possible solutions for redundancy with the ICX-AlphaCom server.
Power Supply
The ICX-AlphaCom normally has one power supply, and it only supports one power input. Using third party products it is possible to Increase durability by adding a solution for redundant power.
The optional TKIS-2 is used in case it is a full redundancy system, with redundant ICX-AlphaCom servers.
The TKIS-2 will then always be registered and can be used to monitor the power supplies as well as the ICX-AlphaCom. Such a full redundant system might look like this:
RCO or RCI
Any physical inputs and/or outputs needs to communicate with the server via an IP device such as the TKIS-2 or an IP-LCM. These devices, as any other IP device in a redundant system must register and communicate with the operational IP address, and thus always be online with the active server.
Serial Port
The ICX-AlphaCom does not have a serial port and must use an Ethernet-to-serial converter. Since the ICX-AlphaCom redundancy system is using a singular IP address as the operational IP address the solution is to have the converter pointed at the operational IP address, and will work fine, independent on which server is the active one.
[Category:Redundancy]