Actions

Difference between revisions of "SIMP (SET SIMPLEX)"

From Zenitel Wiki

Line 8: Line 8:
 
|colspan="5"|'''$SIMP L101 U1 U1''' <br\> '''$SIMP L101'''
 
|colspan="5"|'''$SIMP L101 U1 U1''' <br\> '''$SIMP L101'''
 
|-
 
|-
|colspan="5"|Force current conversation to SIMPLEX mode. Normally triggered by the [[Conversation Outgoing (Event Type)|Conversation Outgoing]] or [[Conversation Incoming (Event Type)|Conversation Incoming]] event. AlphaNet: Message must be sent to the Exchange "owning" the conversation (default B side exchange).<br> The audio level is boosted with 6 dB, same as when M-key is pressed during conversation.
+
|colspan="5"|Force current conversation to SIMPLEX mode. Normally triggered by the [[Conversation Outgoing (Event Type)|Conversation Outgoing]] or [[Conversation Incoming (Event Type)|Conversation Incoming]] event. <br>AlphaNet: Message must be sent to the Exchange "owning" the conversation (default B side exchange).<br> The audio level is boosted with 6 dB, same as when M-key is pressed during conversation.<br> Example: Set the whole exchnage in simplex mode: Owner: UDP 8, Conversation Outgoing event, When Chnage To = ON, When Trelated To = All, Action: @U%2.nod $SIMP L%2.dir U0 U1
 
|-
 
|-
 
|align=center|1||[[NET_OBJ_REF]]<br\>{[[ECL_STATION]]}||colspan="3"|One of the stations in the conversation
 
|align=center|1||[[NET_OBJ_REF]]<br\>{[[ECL_STATION]]}||colspan="3"|One of the stations in the conversation

Revision as of 02:23, 28 February 2011

SET_SIMPLEX 0x00A3 163 AMC 10.52
$SIMP L101 U1 U1 <br\> $SIMP L101
Force current conversation to SIMPLEX mode. Normally triggered by the Conversation Outgoing or Conversation Incoming event.
AlphaNet: Message must be sent to the Exchange "owning" the conversation (default B side exchange).
The audio level is boosted with 6 dB, same as when M-key is pressed during conversation.
Example: Set the whole exchnage in simplex mode: Owner: UDP 8, Conversation Outgoing event, When Chnage To = ON, When Trelated To = All, Action: @U%2.nod $SIMP L%2.dir U0 U1
1 NET_OBJ_REF<br\>{ECL_STATION} One of the stations in the conversation
2 UINT1(Optional) Initial speech direction <br\> 0 = Audio from B station (Default) <br\> 1 = Audio from A station
3 UINT1(Optional) Allow short use of M-press to release Simplex mode <br\> 0 = Allow release of simplex mode (default) <br\> 1 = Inhibit release of simplex mode

Back to AlphaNet message list