Difference between revisions of "School IP Intercom - 1402001000"
From Zenitel Wiki
(→Configuration) |
|||
| Line 10: | Line 10: | ||
General configuration. | General configuration. | ||
| − | * [[IP Station Configuration - AlphaCom mode]] | + | * [[IP Station Configuration - ICX-AlphaCom mode]] |
* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]] | * [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]] | ||
* [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] | * [[SIP Intercom Configuration|IP Station Configuration - SIP mode]] | ||
Revision as of 14:24, 19 November 2020
Contents
Connections
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
Note that the off-line display menu is not available for the School IP Intercom, as the navigation buttons are not present on this station. The station must be configured via the web interface.
General configuration.
- IP Station Configuration - ICX-AlphaCom mode
- IP Station Configuration - Edge mode
- IP Station Configuration - SIP mode
- IP Station Configuration - Pulse mode
Station specific configuration for the School IP Intercom:
- Configuration of School IP Intercom station - AlphaCom mode
- Configuration of School IP Intercom station - Edge mode
- Configuration of School IP Intercom station - Pulse mode
- Configuration of School IP Intercom station - SIP mode
Restore Factory Defaults and Software Upgrade
- Reset to factory settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Accessories
- Surface-Mount Backbox for School IP Intercom (1402001010)
- Flush-Mount Backbox for School IP Intercom (1402001030)
Software Requirements
This station is fully supported as form AlphaCom version 10.50