Difference between revisions of "Situations that require System Reset"
From Zenitel Wiki
| Line 4: | Line 4: | ||
* Reset of the AMC application | * Reset of the AMC application | ||
* Reset of Linux (e.g. reboot the exchange) | * Reset of Linux (e.g. reboot the exchange) | ||
| − | |||
| − | |||
'''Situations that require AMC application reset:''' | '''Situations that require AMC application reset:''' | ||
| − | * | + | * Adding a new IP station in Users & Statuions |
| + | * Change of volume setting of an analog station (Changing the volume of an IP station do not require reset) | ||
| + | * Enabling [[RCO]]. Reset is required when a RCO is changed from device 0 / pin 0. | ||
Revision as of 13:39, 12 December 2008
A number of AlphaPro settings require that the system is reset or rebooted in order to make the change to take effect. Reset of the system can be done from either the Alphacom Communication window, WACS or AlphaWeb.
There are two types of reset:
- Reset of the AMC application
- Reset of Linux (e.g. reboot the exchange)
Situations that require AMC application reset:
- Adding a new IP station in Users & Statuions
- Change of volume setting of an analog station (Changing the volume of an IP station do not require reset)
- Enabling RCO. Reset is required when a RCO is changed from device 0 / pin 0.
Situations that require Linux reset:
Situations that don't require reset or reboot, but where the change take effect after a short time:
- Event Handler programming. (Reset is recommended, but not necessary, before testing the change)