Difference between revisions of "Situations that require System Reset"
From Zenitel Wiki
| Line 1: | Line 1: | ||
A number of AlphaPro settings require that the system is reset or rebooted in order to make the change to take effect. | A number of AlphaPro settings require that the system is reset or rebooted in order to make the change to take effect. | ||
=== Types of reset === | === Types of reset === | ||
| − | There are two types of reset: | + | The [[AMC-IP]] card is using [[Linux]] as operative system (OS). A number of applications are running on top of Linux. One of these applications is the intercom (AMCd) application. Examples of other applications are [[SIP]], [[Syslog]], [[RingMaster]]. |
| + | |||
| + | There are two types of reset available from [[AlphaPro]] and [[AlphaWeb]]: | ||
* Reset of the AMC application. This will restart the intercom application only. An AMC reset takes approx. xx seconds in a fully equipped E7, and xx seconds in a fully equipped E26. | * Reset of the AMC application. This will restart the intercom application only. An AMC reset takes approx. xx seconds in a fully equipped E7, and xx seconds in a fully equipped E26. | ||
** From AlphaPro: Press the 'Reset' button in the [[Communicate (alphaPro)|AlphaPro Communication Window (WACS)]] | ** From AlphaPro: Press the 'Reset' button in the [[Communicate (alphaPro)|AlphaPro Communication Window (WACS)]] | ||
Revision as of 14:01, 12 December 2008
A number of AlphaPro settings require that the system is reset or rebooted in order to make the change to take effect.
Contents
Types of reset
The AMC-IP card is using Linux as operative system (OS). A number of applications are running on top of Linux. One of these applications is the intercom (AMCd) application. Examples of other applications are SIP, Syslog, RingMaster.
There are two types of reset available from AlphaPro and AlphaWeb:
- Reset of the AMC application. This will restart the intercom application only. An AMC reset takes approx. xx seconds in a fully equipped E7, and xx seconds in a fully equipped E26.
- From AlphaPro: Press the 'Reset' button in the AlphaPro Communication Window (WACS)
- From AlphaWeb: Press 'Small Reset' in the System Maintenance -> System Recovery menu
- Reboot the exchange. This will restart the Linux operative system and all applications. A reboot takes approx. xx seconds in a fully equipped E7, and xx seconds in a fully equipped E26.
- From AlphaWeb: Press 'Reboot' in the System Maintenance -> System Recovery menu
- Recycle the power (switch power off, then on)
Situations that require AMC application reset
- Adding a new IP station in Users & Stations
- Change of volume setting of an analog station (Changing the volume of an IP station do not require reset)
- Enabling RCO. Reset is required when a RCO is changed from device 0 / pin 0.
- Adding a SIP node????
- Adding a node in AlphaNet???
Situations that require Linux reset
Situations that don't require reset or reboot, but where the change take effect after a short time
- Event Handler programming. It may take up to 1 minute before the change takes effect. (After reset the change take effect immediately)