Actions

Difference between revisions of "Starting Up Turbine Station"

From Zenitel Wiki

(How to find the IP Address of a device)
Line 1: Line 1:
 
{{AEIPS}}
 
{{AEIPS}}
[[File:TurbineStartingUp.PNG|thumb|right|400px|Connecting the PC and the station to a network switch]]
+
[[File:TurbineStartingUp.PNG|thumb|right|400px|Connecting the PC and the Zenitel IP device to a network switch]]
 
The [[:Category:Stations#Turbine_stations|Zenitel IP devices]] feature an embedded web interface, which allows users to log in using a standard web browser.  
 
The [[:Category:Stations#Turbine_stations|Zenitel IP devices]] feature an embedded web interface, which allows users to log in using a standard web browser.  
  

Revision as of 11:20, 21 September 2021

AEIPS.png
Connecting the PC and the Zenitel IP device to a network switch

The Zenitel IP devices feature an embedded web interface, which allows users to log in using a standard web browser.

To access the IP device, your PC and the device have to be connected to a PoE switch using network cables:

  1. Connect the PC to a port on the network switch
  2. Connect the deviceto a PoE port on the network switch


When the IP device is connected to the network, the IP address of the device is automatically obtained in one of two ways:

  1. An IP address is automatically obtained from a DHCP server if there is one.
  2. If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.


How to find the IP Address of a device

If the device is not registered to a server, it will speak its own IP address when you press the Call button, a Digit key a DAK key or activate an Input.

During commissioning, the device must be set to operate in the required mode. There are three modes of operation:

  • ICX-AlphaCom mode - the device will register to an ICX-AlphaCom or AlphaCom XE server
  • SIP mode - the device will register to a SIP server
  • Edge mode - the device will register to an Edge server

The default mode from factory is "Edge" mode.