|
|
Line 3: |
Line 3: |
| | | |
| VLAN tagging is supported by stations in the [[:Category:Stations#INCA_stations|INCA family]], [[IP Desk Master -V2|IP Desktop Master Station V2]], [[IP Desk Master -V2 w/handset|IP Desktop Master Station with Handset V2]], [[1008431000|IP Flush Master Station V2]] and [[1008415000|IP CROR Master Station V2]]. | | VLAN tagging is supported by stations in the [[:Category:Stations#INCA_stations|INCA family]], [[IP Desk Master -V2|IP Desktop Master Station V2]], [[IP Desk Master -V2 w/handset|IP Desktop Master Station with Handset V2]], [[1008431000|IP Flush Master Station V2]] and [[1008415000|IP CROR Master Station V2]]. |
− |
| |
− | <u>'''User interface:'''</u><br />
| |
− | VLAN is configured in the IP station web interface.
| |
− |
| |
− | *[[Logging into an IP Station|Log into the IP Station]]
| |
− | *Select '''Advanced Network''' > '''VLAN''' from the menu.
| |
− |
| |
− | [[File:IP-StationWeb VLAN.PNG|thumb|left|700px]]
| |
− | <br style="clear:both;" />
| |
− | Clicking the '''Apply settings''' button will apply the chosen settings. With the exception of a restart, the saved settings will not come into effect until '''Apply settings''' is clicked.
| |
− |
| |
− |
| |
− | <u>'''Enable VLAN:'''</u><br />
| |
− | This option determines whether the switch uses 802.1Q or not. If this is enabled, the switch is VLAN aware. Select '''YES''' or '''NO''' from the dropdown menu.
| |
− |
| |
− |
| |
− | <u>'''Port specific VLAN rules and tagging options:'''</u><br />
| |
− | Here, it is possible to specify which VLAN ID and priority the ports should assign untagged packets to. Tagged packets are not changed.
| |
− |
| |
− | *'''VLAN ID''' has a value range from 0 to 4094. It specifies which VLAN ID tag to add to a packet.
| |
− | *'''VLAN priority''' has a value range from 0 to 7. It specifies which VLAN priority tag to add to a packet.
| |
− | *'''Sending filter''' specifies whether a given port will only send to VLANs which it is a member of or all VLANs. For example, if the chosen option is '''MEMBERS''' then a packet with VLAN ID 1 at the LAN port
| |
− |
| |
− | will only reach another port which is a member of VLAN ID 1. Select '''MEMBERS''' or '''ALL''' from the dropdown menu.
| |
− |
| |
− | *'''Acceptance filter''' specifies whether a port will accept only tagged packets or all packets. The option '''ONLY TAGGED''' should only be used against VLAN aware devices which tag packets. Select '''ONLY '''
| |
− |
| |
− | TAGGED''' or '''ALL''' from the dropdown menu.'''
| |
− |
| |
− | *'''If the '''IP-station upgrade with VLAN''' scrolldown box is set to '''YES''' the IP station will send tagged packets during the upgrade.'''
| |
− |
| |
− |
| |
− | <u>'''VLAN priority tag to switch priority:'''</u><br />
| |
− | Here, it is possible to specify how the switch should queue the packets with '''VLAN priority tag'''.
| |
− |
| |
− | *'''Switch priority''': Select '''HIGH''' or '''LOW''' from the dropdown menu. By default, packets with VLAN priority tags from 4 to 7 are set to the '''HIGH''' priority queue.
| |
− |
| |
− | See also [[IP Station on VLAN with Cisco Catalyst PoE swtich]]
| |
− |
| |
− |
| |
− | <u>'''Add ports to a VLAN:'''</u><br />
| |
− | Here, it is possible to determine whether the ports should be members of the specified VLAN. There is also a setting for specifying whether the ports should strip or keep the VLAN tag when sending egress packets.
| |
− |
| |
− | *'''Membership''' determines whether the port is a member of the specified VLAN or not. Select '''Not member''' or '''Member''' from the dropdown menu.
| |
− | *'''Egress tagging''' determines whether the port should remove VLAN tags or keep them for the specified VLAN. Select '''Remove tag''' or '''Keep tag''' from the dropdown menu.
| |
− |
| |
− | Clicking the '''Add VLAN''' button will add the current chosen settings to the '''VLAN table''' below. If a VLAN in the '''VLAN table''' already exists with the chosen '''VLAN ID''', then the settings will be updated.
| |
− |
| |
− |
| |
− | <u>'''Remove VLAN by ID:'''</u><br />
| |
− | Here, it is possible to determine which VLAN is to be removed from the '''VLAN table''' by specifying the '''VLAN ID''', then clicking the '''Remove VLAN''' button.
| |
− |
| |
− |
| |
− | <u>'''VLAN table:'''</u><br />
| |
− | The VLANs that the ports are members of are listed under the '''Membership Info''' column. The table also lists the ports that keep the VLAN tag when sending egress packets; this is shown under the '''Egress '''
| |
− | Tagging Info''' column. The '''VLAN table''' can accommodate a maximum of 63 VLANs.'''
| |
− | ''The DHCP address is received before the switch is VLAN aware (during startup).''
| |
− | ''Either trunk all VLANs or set the DHCP server which should reach the IP substation''
| |
− | ''on a native VLAN.''
| |
− |
| |
− |
| |
| ==Related Articles== | | ==Related Articles== |
| [[IP Station VLAN Configuration Guide]] | | [[IP Station VLAN Configuration Guide]] |