Revision as of 15:20, 6 February 2024

Previous Release - VSF-Fortitude8 8.0 Release Notes

This document provides the release notes for VSFF8MP 8.1 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.1 describe new features, improvements and issues fixed after vsff8mp-7.5.3.2.

Release info

Name: VSF-Fortitude8
Description: vsff8mp is a firmware for Zenitel display series including the following devices: ZMK-1

The firmware is delivered in two different files:

vsff8mp-8.1.3.x - Used for standard in-field upgrades
vsff8mp-prod-8.1.3.x - Used in production- and recovery upgrades.

Version: 8.1.3.0
Date: 02.02.2024
Status: General Availability

VSFF8MP 8.1.3.0

Improvements

MTN-4156 Added option for using Normally Closed switch on I/O Pins configured as input

The default input configuration is Normally Open and the switch contact needs to close to activate the function. A new option “Input NC” has been added to the I/O Pin configuration, which inverts the default behavior and the function is activated on switch open.

Issues fixed

MTN-4330 Call is now established only after highlight and when scrolling through address list it is not able to trigger accidental call.

Known Issues

MTN-4333 HD-Audio mode not working using digital microphone input

Audio is distorted when digital microphone is used. Audio is OK if using analogue microphone input

MTN-4121 Known issue: Asterisk discards alternative profiles

Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5.

The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182

@@ Line 25: / Line 25: @@
 ==Issues fixed==
-=== MTN-4346 User experience: Audio output level too low when in open duplex conversation with imx6 and im8 based devices ===
+=== MTN-4330 Call is now established only after highlight and when scrolling through address list it is not able to trigger accidental call. ===
-The gain was increased after AEC but before the audio signal compander (with AGC function) so transmitted signal level reaches target level of -23 dBFS with “nominal voice input”
-=== MTN-4288 TCIV+ video stream is now working properly with Ganz Control VMS===
-There was an issue with video stream in Ganz Control VMS, this is now fixed.
-=== MTN-4284 Relay activation by Pin code can now play audio messages ===
-Activating of Relay caused by PIN-code function will now trigger audio messages if it is configured.
-=== MTN-4230 Fixed issue where audio is not heard when station is using SRTP===
-When stations are registered to a SIP server using TLS, Secure SIP and SRTP, audio was heard only on the caller side. This is now fixed, and audio can be heard on both sides.
-=== MTN-4219 'DAVC' and 'Offline Relays' were not visible in the station web menu in ICX-AlphaCom mode===
-The DAVC and Offline Relays settings are now available in the station web menu in ICX-AlphaCom mode.
-=== MTN-4217 Allowing underscore in SNMP community string===
-Underscore is now allowed in the SNMP community string.
 <br>

Difference between revisions of "VSF-Display Series 8.1 Release Notes"

From Zenitel Wiki