VSF-Fortitude8 8.0 Release Notes
From Zenitel Wiki
This document provides the release notes for VSF-Fortitude8 8.0 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.0 describe new features, improvements and issues fixed after VSF-Fortitude8 188.8.131.52.
- 1 Release info
- 2 VSF-FORTITUDE8 184.108.40.206
- 3 VSF-FORTITUDE8 220.127.116.11
- 4 VSF-FORTITUDE8 18.104.22.168
- 4.1 Improvements
- 4.2 Issues fixed
- 4.2.1 MTN-4229 HD audio for back ground music distribution in ICX-AlphaCom produced noise
- 4.2.2 MTN-4206 SIP H.264 video calls are now working properly with Genetec Sipelia and Cisco
- 4.2.3 MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS
- 4.2.4 MTN-4176 AVC config now shown under Audio Settings
- 4.2.5 MTN-4072 JQuery version update to version 3.6.4
- 4.3 Known Issues
The firmware is delivered in two different files:
- vsff8-8.0.3.x - Used for standard in-field upgrades
- vsff8-prod-8.0.3.x - Used in production- and recovery upgrades.
Status: General Availability
In version 22.214.171.124 the network settings were saved immediately when pressing the Save button, which caused the device to reboot without notifying the user. This is now fixed, and as in earlier software releases, the user is redirected to a new page with an Apply button to confirm the new network configuration.
This issue also affected Zenitel IMT: In combination with version 126.96.36.199, the Zenitel IMT configuration wizard would get stuck when changing network settings and saving. This is now fixed.
MTN-4238 The Dynamic Range Compression (DRC) could cause signal clipping of the loudspeaker output when the DRC was set to a high value.
Modified how the gain is applied to the DRC to reduce the risk of signal clipping.
Note that DRC is a dynamic digital signal gain adjust function, and some signal clipping may still occur on high DRC gain configuration.
DS-706 Internal update, no impact on functionality.
MTN-2448 Support for uploading HTTPS certificates
A more user friendly approach to allow end-user to generate the CSR, and to upload HTTPS certificate to the devices.
DS-592 OpenSSL upgraded to 3.0
OpenSSL has been upgraded to the latest LTS version.
MTN-4229 HD audio for back ground music distribution in ICX-AlphaCom produced noise
Issue with PCM sampling is now fixed.
MTN-4206 SIP H.264 video calls are now working properly with Genetec Sipelia and Cisco
There was an issue with SIP H.264 video calls with Genetec Sipelia and Cisco, this is now fixed.
MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS
There was an issue with how Report DAK and Report station call events as Digital Input in ONVIF options were behaving in Hanwha VMS, this is now fixed and they work as expected.
MTN-4176 AVC config now shown under Audio Settings
AVC config was missing on 7.5 version. This is fixed, AVC is now visible and configurable.
MTN-4072 JQuery version update to version 3.6.4
Now the Station Web is running newer JQuery version with included JQuery migrate to support some of the older functions.
MTN-4121 Known issue: Asterisk discards alternative profiles
Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5.
The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182