Difference between revisions of "Volume and handset override"
From Zenitel Wiki
| (30 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | {{AI}} |
| − | '''Volume and handset override''' is applicable for analog display stations and all types of IP stations | + | '''Volume and handset override''' is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations. |
| + | Volume and handset override is activated by the following features: | ||
| + | * '''Group calls''' with [[Groups#Group_Call_Priority|Alarm priority]] | ||
| + | * '''Audio Program''', remotly setup to group, activated by: | ||
| + | ** Using [[Remote setup of program to group feature|feature code 75]] | ||
| + | **Event handler command [[PRG]], or | ||
| + | **[[ACDP]] command [[PROGRAM|$PROG]]. | ||
| + | :In AlphaPro the audio program must have the flag [[Audio Programs (AlphaPro)|Volume/Handset Override]] enabled. | ||
| + | * '''Prerecorded voice alarm messages''' (ASVP), remotly setup by: | ||
| + | **The [[Start Alarm message at station feature|feature code 761]] | ||
| + | **The event handler commands [[AMS - Alarm Message to Station|AMS]] and [[AMG]], or | ||
| + | **The [[ACDP]] data command [[ALARM_MSG|$ALRM]] | ||
| + | **The [[ACDP]] data command [[GROUP MSG|$GM]] when parameter 5 = 4. | ||
| − | + | ||
| − | + | {{Note|Analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210).}} | |
| − | + | ||
| + | |||
| + | See also: [[MVO|$MVO - Mask handset and volume override]] | ||
| + | |||
| + | [[Category: ICX-AlphaCom features]] | ||
| + | [[Category: AlphaCom features]] | ||
Latest revision as of 10:54, 5 May 2023
Volume and handset override is a feature that forces the station volume to maximum level, and in case the handset is off-hook, it will reconnect the loudspeaker by forcing the station to go on-hook. The feature is applicable for analog display stations and all types of IP stations.
Volume and handset override is activated by the following features:
- Group calls with Alarm priority
- Audio Program, remotly setup to group, activated by:
- Using feature code 75
- Event handler command PRG, or
- ACDP command $PROG.
- In AlphaPro the audio program must have the flag Volume/Handset Override enabled.
- Prerecorded voice alarm messages (ASVP), remotly setup by:
|
Analog stations without display data receiver inside do not support handset and volume override.(E.g. models 1007034210, 1007036210, VMP-619 and 1007001210). |
See also: $MVO - Mask handset and volume override