Difference between revisions of "Wall Master Station, Standard - 1007040000"
From Zenitel Wiki
(→Installation) |
(→Description) |
||
Line 13: | Line 13: | ||
This master station is designed for both flush and surface | This master station is designed for both flush and surface | ||
mounting on the wall. Back-boxes are available for this | mounting on the wall. Back-boxes are available for this | ||
− | purpose. In addition to the AlphaCom and AlphaCom | + | purpose. In addition to the AlphaCom E and AlphaCom |
systems the station can be used with the former TouchLine | systems the station can be used with the former TouchLine | ||
and TouchLine Compact systems. Typical application | and TouchLine Compact systems. Typical application |
Revision as of 23:29, 2 April 2008
Contents
Features
- Fully equipped master station with free access to all extensions and features.
- Rugged front plate of anodised brushed aluminium.
- Private / Open switch.
- Red “microphone live” lamp.
- Built-In 63 Ohm / 1W loudspeaker.
- Adjustable loudspeaker volume.
- Excellent sound quality.
Description
This master station is designed for both flush and surface mounting on the wall. Back-boxes are available for this purpose. In addition to the AlphaCom E and AlphaCom systems the station can be used with the former TouchLine and TouchLine Compact systems. Typical application areas are stores & warehouses, factory shop floors and laboratories.
The station is a fully equipped master station with free access to all extensions and features.
A Modular Jack plug on the station end gives quick and easy connection to the station’s circuit board.
2-pair 0,5 mm2 twisted telephone cable is required between the exchange and the station. The maximum distance is 1,4 km (4600 feet) with 0,5 mm2 cable. Greater distances is possible by using heavier wires.
The station is equipped with an electret microphone - which automatically adjusts to the audio level - and a 63 Ohm / 1 W loudspeaker. The loudspeaker volume is easily adjustable with a screwdriver using the potentiometer located on the outside of the front plate.
Installation
Mounting
The station can be mounted in: