EVENT REPORT
From Zenitel Wiki
(Redirected from $ER)
| EVENT_REPORT | 0x0067 | 103 | AMC 07.00 | |
|---|---|---|---|---|
| $ER U15 U0 U1 U1 L101 U3 L9000 $ER U15 U0 U1 U1 L101 |
Triggers the event type 15, subevent 0, When Change To = ON, Owner = station 101, Related To = directory number 9000 Triggers the event type 15, subevent 0, When Change To = ON, Owner = station 101, No 'Related To' information | |||
| Report an event to the event/action system. The event may activate an action if there is a match between the parameters in this signal and the parameters of one or more of the entries programmed in the system.
Event Report can be used both to kick off actions in a local exchange, and in a remote exchange via AlphaNet. Event Owners need not be physical stations, so it’s possible to set up “dummy” stations to handle all kinds of exchange control. One possible use is to let an RCI perform a lengthy action string which is stored in the Event Handler. Program the RCI with $ER…., then the real (long) action on a dummy station event. | ||||
| 1 | UINT2 | Event identification. This parameter encodes two values: UINT1 - main event: See system documents for a detailed description.From AlphaPro 08.00: go to Event Handler screen, see number in Event drop-down list.
| ||
| 2 | UINT1 | Event state (transition): 0 = OFF 1 = ON | ||
| 3 | UINT1 | Owner type: 1=Station | ||
| 4 | NET_OBJ_REF {ECL_STATION, ECL_USER} |
Owner identification, according to parameter 3: - Dir.no of a station (NRF_LOCAL_DIRNO) - NRF_LOCAL_ENTITY/NRF_PHYS_ADDR of station (from AMC 09.03) The owner is always located in the node that receives this message. | ||
| 5 | UINT1 | Related station / feature type: 0 = no related info 3 = dir.no | ||
| 6 | NET_OBJ_REF | Related dir.no, according to parameter 5: - dir.no of a station or a feature (NRF_LOCAL_DIRNO). Node number can also be specified, i.e. the node number of the exchange where the dir.no is defined. | ||
| 7 | UINT1 (optional AMC 07.60) |
Related dir.no’s User Defined Properties (if dir.no of a station). Default value: Related dir.no’s UDP | ||
| 8 | TEXT16 (optional) |
Related dir.no’s display text (name) Default value: Related dir.no’s name. |
AMC 08.20 | |