Difference between revisions of "APC - AlphaCom Program & Clock Board"
From Zenitel Wiki
Line 24: | Line 24: | ||
* An RJ11 plug used for [[hot-plug|hot plug-in]] of other feature boards | * An RJ11 plug used for [[hot-plug|hot plug-in]] of other feature boards | ||
* A reset button. When pressed, the server will reboot. No configuration will be lost, but any active calls will be terminated. | * A reset button. When pressed, the server will reboot. No configuration will be lost, but any active calls will be terminated. | ||
− | * 6 potensiometers for adjuting the input level | + | * 6 potensiometers for adjuting the input level of the 6 [[Audio program]] inputs |
<br> | <br> |
Revision as of 15:35, 31 August 2018
Highlights
- System master clock
- Circuitry for 6 audio program feed channels with adjustable sensitivity (gain)
- 6 alarm inputs
- Fan control
- Power connector (6-pin socket source) for hot plug-in cable
- Reset button in front
Installation
The APC board is used in the AlphaCom XE20 and XE26 servers. The board plugs into board position 26
The APC board has in front:
- An RJ11 plug used for hot plug-in of other feature boards
- A reset button. When pressed, the server will reboot. No configuration will be lost, but any active calls will be terminated.
- 6 potensiometers for adjuting the input level of the 6 Audio program inputs
APC Connection Kit - 1009503000
The APC Connection Kit is required to access the 6 remote control inputs and 6 audio program inputs of the APC. The kit consists of APC filter card and APC connection board.