Difference between revisions of "Software Upgrade (Edge)"
From Zenitel Wiki
(→Upgrade from the Edge Controller) |
|||
| Line 12: | Line 12: | ||
== Upgrade from the Edge Controller == | == Upgrade from the Edge Controller == | ||
| − | + | ===Prerequisites=== | |
| + | # A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html. | ||
| + | # Download the software package '''[[Downloads#Turbine_stations|vsft-4.11.3.0.zip]]''', and unzip the package and store the files in a folder on your PC. | ||
| + | # Check if your local firewall is '''not''' blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process) | ||
| + | <br> | ||
| + | |||
| + | === Upgrade procedure === | ||
| + | The upgrade is a two step process: | ||
| + | |||
| + | 1. Start the TFTP server program and click '''Browse''', and select the folder where the version 4.11.3.0 software files are located | ||
| + | |||
| + | [[File:Upgrade4732tftp.png|thumb|left|500px|TFTP Server - Browse to the folder where the software files are located]] | ||
| + | <br style="clear:both;" /> | ||
| + | |||
| + | 2. [[Logging into an IP Station|Log on to the Turbine Station]] web interface. Default login credentials are '''admin''' and '''alphaadmin'''. Select '''Station Administration''' > '''Manual Upgrade''' | ||
| + | |||
| + | 3. Enter the IP address of the '''TFTP server''' (I.e. the IP address of your PC) | ||
| + | |||
| + | 4. Enter the image file prefixed by "boot": '''boot/vsft-4.11.3.0''', and click '''Save settings'''. Wait a few seconds for the page to refresh, then press '''Upgrade'''. The station will now reboot. This process will upgrade the boot loader environment. For more details about this process, see [[Turbine bootloader upgrade]] | ||
| + | |||
| + | [[File:Turbine Upgrade 49.PNG|thumb|left|500px|Load '''boot/vsft-4.111.3.0''' to upgrade the boot environment. Press '''Save Settings''', then '''Upgrade''']] | ||
| + | <br style="clear:both;" /> | ||
| + | |||
| + | 5. When the station is back online, enter the image file: '''vsft-4.11.3.0''', and click '''Save settings'''. Wait a few seconds for the page to refresh, then press '''Upgrade'''. This process will upgrade the station firmware. | ||
| + | |||
| + | [[File:Turbine Upgrade 49_2.PNG|thumb|left|500px|Load '''vsft-4.11.3.0''' to upgrade the station firmware]] | ||
| + | <br style="clear:both;" /> | ||
| + | |||
| + | The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program. | ||
| + | |||
| + | {{note|If video is not working after having upgraded the [[:Category:Stations#Turbine_stations|Turbine Video Station TCIV-x]] to firmware version 4.11, see article [[TCIV - No video after upgrading to v. 4.11]]}} | ||
| + | <br> | ||
[[Category: IC-EDGE Configuration]] | [[Category: IC-EDGE Configuration]] | ||
Revision as of 15:25, 11 April 2019
|
This article is under construction! |
The software of Vingtor-Stentofon devices in an IC-EDGE System can be mass upgraded in two ways. Either:
- by using the VS-IMT tool
- from the Edge Controller
Contact mail:support.usa@zenitel.com to get the lates software version for Edge devices.
Contents
Upgrade using the VS-IMT tool
For a detailed procedure, see the VS-IMT Upgrade Stations
Upgrade from the Edge Controller
Prerequisites
- A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
- Download the software package vsft-4.11.3.0.zip, and unzip the package and store the files in a folder on your PC.
- Check if your local firewall is not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)
Upgrade procedure
The upgrade is a two step process:
1. Start the TFTP server program and click Browse, and select the folder where the version 4.11.3.0 software files are located
2. Log on to the Turbine Station web interface. Default login credentials are admin and alphaadmin. Select Station Administration > Manual Upgrade
3. Enter the IP address of the TFTP server (I.e. the IP address of your PC)
4. Enter the image file prefixed by "boot": boot/vsft-4.11.3.0, and click Save settings. Wait a few seconds for the page to refresh, then press Upgrade. The station will now reboot. This process will upgrade the boot loader environment. For more details about this process, see Turbine bootloader upgrade
5. When the station is back online, enter the image file: vsft-4.11.3.0, and click Save settings. Wait a few seconds for the page to refresh, then press Upgrade. This process will upgrade the station firmware.
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
|
If video is not working after having upgraded the Turbine Video Station TCIV-x to firmware version 4.11, see article TCIV - No video after upgrading to v. 4.11 |