Difference between revisions of "Software Upgrade (Edge)"
From Zenitel Wiki
(→Upgrade using the VS-IMT tool) |
|||
| (70 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{E}} | {{E}} | ||
| − | The software of Vingtor-Stentofon devices can be | + | The software of the Vingtor-Stentofon devices in an [[:Category:IC-EDGE System|IC-EDGE System]] can be mass upgraded in two ways. Either: |
| − | * | + | * by using the [[IMT|VS-IMT]] tool |
| − | * | + | * from the Edge Controller |
| + | |||
| + | {{obs| | ||
| + | * ''If upgrading an existing Pulse System, make sure that the Edge Controller is a [[:Category:Stations#Turbine_stations|Turbine device]]. An [[:Category:Stations#INCA_stations|INCA device]] '''cannot''' serve as an Edge Controller, even if it was acting as a Pulse Server in the existing installation'' }} | ||
== Upgrade using the VS-IMT tool == | == Upgrade using the VS-IMT tool == | ||
| − | + | For a detailed procedure, see the [[IMT - Discover & Upgrade]] | |
| − | + | <br> | |
== Upgrade from the Edge Controller == | == Upgrade from the Edge Controller == | ||
| + | ===Prerequisites=== | ||
| + | # A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html. | ||
| + | # Download the [[Downloads#IC-EDGE_System|Software Package for IC-Edge]] | ||
| + | # Unzip the software package and store the files in a folder on your laptop. | ||
| + | # The firewall on the laptop must '''not''' blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process) | ||
| + | <br> | ||
| + | |||
| + | === Upgrade procedure === | ||
| + | * Start the TFTP server program and click '''Browse''', and select the folder where the software files are located | ||
| + | |||
| + | [[File:Edge TFTP.PNG|thumb|left|700px|TFTP Server - Browse to the folder where the software files are located]] | ||
| + | <br style="clear:both;" /> | ||
| + | |||
| + | * Start a web browser (e.g. Firefox or Chrome), and [[Logging into an IP Station|Log on to the Edge Controller]]. Select '''Edge Controller''' > '''Software Upgrade''' | ||
| + | * Enter the IP address of the '''TFTP server''' (I.e. the IP address of your laptop) | ||
| + | * Enter the '''Image File''' name, e.g '''vsft-5.1.3.0''' | ||
| + | * When updating [[:Category:Stations#INCA_stations|INCA devices]], also a '''Checksum''' must be entered. Leave the Checksum field blank when upgrading [[:Category:Stations#Turbine_stations|Turbine devices]]. | ||
| + | ** The checksum is found in a text file in the software folder, e.g. "A100G80200.02_11_3_0.txt". Open this file and make a note of (or copy to the clipboard) the checksum. | ||
| + | * Select which stations to upgrade, and click '''Upgrade'''. | ||
| + | |||
| + | [[File:Edge SoftwareUpgrade.PNG|thumb|left|700px|Enter TFTP server, firmware name and check which stations to upgrade]] | ||
| + | <br style="clear:both;" /> | ||
| + | |||
| + | The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program. | ||
| + | |||
| + | {{obs| | ||
| + | * ''Do not unplug devices during the upgrade!'' | ||
| + | * ''It is recommended to use the same software version in all devices'' | ||
| + | * ''After having upgraded [[:Category:Stations#Turbine_stations|Turbine devices]] from version 4.x to version 5.x, a factory default is recommended for all new settings and features to take effect'' | ||
| + | * ''After having upgraded [[:Category:Stations#INCA_stations|INCA devices]] from version 2.x to version 2.10, a factory default is recommended for all new settings and features to take effect'' }} | ||
| + | |||
| + | {{note|If video is not working after having upgraded the [[:Category:Stations#Turbine_stations|Turbine Video Station TCIV-x]], see article [[TCIV - No video after upgrading to v. 4.11|TCIV - No video after upgrading]]}} | ||
| + | <br> | ||
| + | |||
| + | {{Doc|This article is linked to from the document A100K11980 }} | ||
| + | |||
[[Category: IC-EDGE Configuration]] | [[Category: IC-EDGE Configuration]] | ||
Latest revision as of 08:54, 16 August 2022
The software of the Vingtor-Stentofon devices in an IC-EDGE System can be mass upgraded in two ways. Either:
- by using the VS-IMT tool
- from the Edge Controller
|
|
Contents
Upgrade using the VS-IMT tool
For a detailed procedure, see the IMT - Discover & Upgrade
Upgrade from the Edge Controller
Prerequisites
- A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
- Download the Software Package for IC-Edge
- Unzip the software package and store the files in a folder on your laptop.
- The firewall on the laptop must not blocking incoming ping/ICMP (Turbine station is pinging TFTP Server during update process)
Upgrade procedure
- Start the TFTP server program and click Browse, and select the folder where the software files are located
- Start a web browser (e.g. Firefox or Chrome), and Log on to the Edge Controller. Select Edge Controller > Software Upgrade
- Enter the IP address of the TFTP server (I.e. the IP address of your laptop)
- Enter the Image File name, e.g vsft-5.1.3.0
- When updating INCA devices, also a Checksum must be entered. Leave the Checksum field blank when upgrading Turbine devices.
- The checksum is found in a text file in the software folder, e.g. "A100G80200.02_11_3_0.txt". Open this file and make a note of (or copy to the clipboard) the checksum.
- Select which stations to upgrade, and click Upgrade.
The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the Log viewer tab in the TFTP server program.
|
|
|
|
If video is not working after having upgraded the Turbine Video Station TCIV-x, see article TCIV - No video after upgrading |
|
This article is linked to from the document A100K11980 |