Difference between revisions of "Transparent Mode DAK-Key Configuration"
From Zenitel Wiki
| (19 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | {{AI}} | ||
When making an external call from AlphaCom out on a SIP trunk (or to a station type PNCI), the dialed digits are sent transparent through the AlphaCom, out on the SIP Trunk. | When making an external call from AlphaCom out on a SIP trunk (or to a station type PNCI), the dialed digits are sent transparent through the AlphaCom, out on the SIP Trunk. | ||
However, there might be a need to let the AlphaCom handle the digits, for example if one wants to make a [[Inquiry Call feature|call transfer]] (2 + intercom number + 3) or [[Blind Transfer During Connection|blind transfer]] after the telephone call has been established. | However, there might be a need to let the AlphaCom handle the digits, for example if one wants to make a [[Inquiry Call feature|call transfer]] (2 + intercom number + 3) or [[Blind Transfer During Connection|blind transfer]] after the telephone call has been established. | ||
| − | + | Default operation: | |
| − | + | * DAK key 8 (counted from 0) is used for switching off "transparent mode" when calling from analog (ASLT) stations. | |
| + | * DAK key 3 (counted from 0) is used when calling from IP stations. | ||
| − | The | + | The full operation to transfer a call after having established an external conversation, is: DAK 8 + 2 + intercom number + 3. |
| − | |||
| − | + | == Configuration from AlphaPro Event Handler == | |
| − | DAK | + | The [[System_Status_%28Event_Type%29 | System Status Event]] related to device (subevent) 65 can be used to write the wanted value to the nvram at system startup: |
| + | |||
| + | {{code2| | ||
| + | $SNV Q<DAK key> W1 W2 W21}} | ||
| + | |||
| + | <DAK key> = 2 to 9. | ||
| − | == Configuration | + | Example: |
| − | + | [[File:Trans mode off.PNG|left|thumb|400px|Use DAK key 2 to turn off "transparent mode"]] | |
| + | <br style="clear:both;" /> | ||
| + | |||
| + | == Configuration using TST console == | ||
| + | Which DAK key to use for switching off transparent mode can be configured from the nvram editor in the [[TST console]]: | ||
| + | |||
| + | {{code|.ex_profile.glob_const.trans_mode_dak <nowiki>=</nowiki> 8 (0x08)}} | ||
| − | + | Possible values are 2 - 9 <br /> | |
| − | DAK | + | Note that DAK keys 0 and 1 are reserved for * and # and cannot be used. |
| + | If trans_mode_dak is changed from default 8, both IP stations and ASLT stations will use the configured DAK key. | ||
Back to [[Feature description]] | Back to [[Feature description]] | ||
| + | |||
| + | [[Category: ICX-AlphaCom features]] | ||
| + | [[Category: ICX-AlphaCom - SIP Integration]] | ||
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] | ||
| + | [[Category: AlphaCom - SIP Integration]] | ||
Latest revision as of 11:16, 23 February 2023
When making an external call from AlphaCom out on a SIP trunk (or to a station type PNCI), the dialed digits are sent transparent through the AlphaCom, out on the SIP Trunk.
However, there might be a need to let the AlphaCom handle the digits, for example if one wants to make a call transfer (2 + intercom number + 3) or blind transfer after the telephone call has been established.
Default operation:
- DAK key 8 (counted from 0) is used for switching off "transparent mode" when calling from analog (ASLT) stations.
- DAK key 3 (counted from 0) is used when calling from IP stations.
The full operation to transfer a call after having established an external conversation, is: DAK 8 + 2 + intercom number + 3.
Configuration from AlphaPro Event Handler
The System Status Event related to device (subevent) 65 can be used to write the wanted value to the nvram at system startup:
Action commands:
$SNV Q<DAK key> W1 W2 W21
<DAK key> = 2 to 9.
Example:
Configuration using TST console
Which DAK key to use for switching off transparent mode can be configured from the nvram editor in the TST console:
.ex_profile.glob_const.trans_mode_dak = 8 (0x08)
|
Possible values are 2 - 9
Note that DAK keys 0 and 1 are reserved for * and # and cannot be used.
If trans_mode_dak is changed from default 8, both IP stations and ASLT stations will use the configured DAK key.
Back to Feature description