Difference between revisions of "Starting Up Turbine Station"

Latest revision as of 14:57, 7 September 2023

Connect the PC and the Zenitel IP device to a network switch

The Zenitel IP devices feature an embedded web interface, which allows users to log in using a standard web browser.

Connect the LAN port of the device to a PoE port on the network switch
Connect the PC to a port on the network switch

When the IP device is connected to the network, the IP address of the device is automatically assigned in one of two ways:

An IP address is automatically obtained from a DHCP server if a DHCP server is present on the network.
If there is no DHCP server, a random IP address in the range 169.254.x.x will be assigned.

The previous generation of devices ("INCA" devices) have a default static IP address 169.254.1.100.

How to find the IP Address of a device

If the device is not registered to a server, it will speak its own IP address when you press the Call button, a Digit key a DAK key or activate an Input.

During commissioning, the device must be set to operate in the required mode. There are three modes of operation:

ICX-AlphaCom mode - the device will register to an ICX-AlphaCom or AlphaCom XE server
SIP mode - the device will register to a SIP server
Edge mode - the device will register to an Edge server

The default mode from factory is "Edge" mode.

As an alternative you can scan the network for Zenitel devices using the PC application IMT (Intercom Management Tool). Start IMT, select Discover & Upgrade from main menu, and enter IP address range to scan.

As soon as you know the IP address, you can log into the device.

@@ Line 1: / Line 1: @@
-{{APS}}
+{{AEIPS}}
-[[File:TurbineStartingUp.PNG|thumb|right|400px|Connecting the PC and the station to a network switch]]
+[[File:StartUp Z-device.PNG|thumb|right|400px|Connect the PC and the Zenitel IP device to a network switch]]
-The [[:Category:Turbine|Turbine Stations]] feature an embedded web interface, which allows users to log in via a standard web browser.
+The [[:Category:Stations#Turbine_stations|Zenitel IP devices]] feature an embedded web interface, which allows users to log in using a standard web browser.
-To start up the station, your PC and the IP station have to be connected together via a PoE switch using network cables:
+# Connect the LAN port of the device to a '''PoE port''' on the network switch
 # Connect the PC to a port on the network switch
-# Connect the station to a PoE port on the network switch
-When the Turbine Station is connected to the network, the '''IP address''' of the station is automatically obtained in one of two ways:
-# An IP address is obtained from a '''DHCP server''' if there is one.
+When the IP device is connected to the network, the '''IP address''' of the device is automatically assigned in one of two ways:
+# An IP address is automatically obtained from a '''DHCP server''' if a DHCP server is present on the network.
 # If there is no DHCP server, a random IP address in the range '''169.254.x.x''' will be assigned.
-== How to find the IP Address of the station ==
+{{note|[[:Category:INCA Stations|The previous generation of devices ("INCA" devices)]] have a default static IP address '''169.254.1.100'''.}}
-If the station is not registered to a server, it will speak its own IP address when you press the '''Call button''', a '''Digit key''' a '''DAK key''' or activate an '''Input'''  on the station.
+<br>
+== How to find the IP Address of a device ==
+If the device is not registered to a server, it will speak its own IP address when you press the '''Call button''', a '''Digit key''' a '''DAK key''' or activate an '''Input'''.
+During commissioning, the device must be set to operate in the required mode. There are three modes of operation:
+* '''ICX-AlphaCom mode''' - the device will register to an ICX-AlphaCom or AlphaCom XE server
+* '''SIP mode''' - the device will register to a SIP server
+* '''Edge mode''' - the device will register to an Edge server
+The default mode from factory is "Edge" mode.
-At startup the station is by default set to operate in PULSE mode.
+As an alternative you can scan the network for Zenitel devices using the [[IMT - Discover & Upgrade|PC application IMT (Intercom Management Tool)]]. Start IMT, select '''Discover & Upgrade''' from main menu, and enter IP address range to scan.
-During commissioning, the station must be set to operate in the required mode. There are three modes of operation:
+As soon as you know the IP address, you can [[Logging into an IP Station|log into the device]].
-* '''AlphaCom mode''' - the station will register to an AlphaCom server
-* '''SIP mode''' - the station will register to a SIP server
-* '''Pulse mode''' - the station will register to a Pulse server
 [[Category: Turbine - Restore Factory Defaults and Software Upgrade]]

Difference between revisions of "Starting Up Turbine Station"

From Zenitel Wiki

Latest revision as of 14:57, 7 September 2023

How to find the IP Address of a device