Difference between revisions of "TA-23"
From Zenitel Wiki
(→Handset operation) |
(→Configuration) |
||
| (17 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
==Highlights== | ==Highlights== | ||
| − | * Rugged handset for Industrial application | + | |
| − | * PTT-key for simplex operation in extremely noisy environments | + | *Rugged handset for Industrial application |
| − | * Noise-cancelling microphone | + | *PTT-key for simplex operation in extremely noisy environments |
| − | * High quality digital background noise reduction | + | *Noise-cancelling microphone |
| − | * HD-voice compatible | + | *High quality digital background noise reduction |
| − | + | *HD-voice compatible | |
| − | * Designed for Turbine Industrial Intercoms | + | *Designed for Turbine Industrial Intercoms |
| − | + | *Can be added to TCIS series intercoms from Firmware 4.9.3.2 | |
| + | |||
| + | |||
[[File:TA-23 Side.png|right|250px]] | [[File:TA-23 Side.png|right|250px]] | ||
| + | ==Connecting the TA-23 handset to the TFIE station== | ||
| − | + | *[[Open the TFIE/TFIX Enclosure|Open the TFIE Enclosure]] | |
| − | * [[Open the TFIE/TFIX Enclosure|Open the TFIE Enclosure]] | + | *Plug the IDC connectors of the Handset cable into the [[Turbine Extended series board connectors|J8 terminal block]] according to the pin configuration below. |
| − | * Plug the IDC connectors of the Handset cable into the [[Turbine Extended | ||
[[File:TA-23 Connections 1.PNG|thumb|left|350px|TA-23 Handset Connection on 9-Pin Terminal J8]] | [[File:TA-23 Connections 1.PNG|thumb|left|350px|TA-23 Handset Connection on 9-Pin Terminal J8]] | ||
| Line 22: | Line 24: | ||
| − | ==Configuration== | + | ===Configuration=== |
| − | * [[ | + | * [[Logging into an Zenitel IP Device|Log in to the station web interface]] |
| − | * | + | * Navigate to '''Audio Settings'''. |
| − | [[File: | + | * Set "Accessories" to "'''Handset'''" |
| + | * Reboot the station. | ||
| + | [[File:TFIE Handset.PNG|thumb|left|700px|TA-23 Handset accessory setting]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | ==Handset operation== | + | ===Handset operation=== |
[[File:TFIE SpeakerButton.PNG|thumb|200px|Toggle Button in the TFIE-1 station]] | [[File:TFIE SpeakerButton.PNG|thumb|200px|Toggle Button in the TFIE-1 station]] | ||
| − | When "Accessory" is set to " | + | *When "Accessory" is set to "'''Handset'''" the station is by default in loudspeaking mode, i.e. the audio is routed to the speaker and microphone of the front panel of the TFIE station. Audio is also routed to the handset speaker, but the handset microphone is disabled. |
| + | *When a call is received, handset mode is activated by pressing the PTT button in the handset. The audio will then be routed to the handset, and the loudspeaker and the microphone in the front panel is muted. | ||
| + | *When the TFIE station returns to idle, e.g. when a call is ended, the station will automatically return to loudspeaking mode. | ||
| + | *In stations with '''Toggle''' button ([[TFIE-1]] only), one can also use this button to activate the handset. The button lets you toggle between loudspeaking and handset mode. The LED in the toggle button shows the status: | ||
| + | **Green LED = Loudspeaking mode | ||
| + | **Red LED = Handset mode | ||
| − | + | ==Connecting TA-23 to a TCIS series Intercom== | |
| − | + | *Modify the plastic housing to access the Microphone terminals | |
| + | *Connect the handset cable as shown below | ||
| − | In | + | [[File:Ta23 TCIS.png|alt=|left|thumb|653x653px]] |
| − | + | <br style="clear:both;" /> | |
| − | + | ||
| + | === Configuration === | ||
| + | |||
| + | * [[Logging into an Zenitel IP Device|Log in to the station web interface]] | ||
| + | * Enable '''Advanced Configuration''' Mode | ||
| + | * Navigate to the '''Audio settings''' | ||
| + | * In the '''Audio Inputs''' section set the "Internal Microphone" to '''I/O Pin A->D Switch (until call-end)''', and select Pin number for the PTT signal. See also [[Audio_Settings_(Devices)#Audio_Inputs]]. | ||
| − | + | === Handset Operation === | |
| + | To enable the handset, simply press the PTT button on the handset. The handset will remain enabled for the duration of the call. | ||
==Dimensions== | ==Dimensions== | ||
| − | <gallery widths=150px heights=300px perrow=3> | + | <gallery widths="150px" heights="300px" perrow="3"> |
File:TA-23 Dimensions 1.PNG | File:TA-23 Dimensions 1.PNG | ||
File:TA-23 Dimensions 2.PNG | File:TA-23 Dimensions 2.PNG | ||
| Line 49: | Line 66: | ||
</gallery> | </gallery> | ||
| − | <gallery widths=200px heights=175px perrow=2> | + | <gallery widths="200px" heights="175px" perrow="2"> |
File:TA-23 Dimensions 4.PNG | File:TA-23 Dimensions 4.PNG | ||
File:TA-23 Dimensions 5.PNG | File:TA-23 Dimensions 5.PNG | ||
| Line 55: | Line 72: | ||
| − | == Related Information == | + | ==Related Information== |
| − | * [http://www.zenitel.com/product/ta-23 Additional Documentation on Zenitel.com] | + | |
| + | *[http://www.zenitel.com/product/ta-23 Additional Documentation on Zenitel.com] | ||
[[Category: Turbine Backboxes and accessories]] | [[Category: Turbine Backboxes and accessories]] | ||
Latest revision as of 11:23, 5 September 2024
The TA-23 handset comes with a Push-To-Talk (PTT) button and 3.5-meter long cable.
Contents
Highlights
- Rugged handset for Industrial application
- PTT-key for simplex operation in extremely noisy environments
- Noise-cancelling microphone
- High quality digital background noise reduction
- HD-voice compatible
- Designed for Turbine Industrial Intercoms
- Can be added to TCIS series intercoms from Firmware 4.9.3.2
Connecting the TA-23 handset to the TFIE station
- Open the TFIE Enclosure
- Plug the IDC connectors of the Handset cable into the J8 terminal block according to the pin configuration below.
Configuration
- Log in to the station web interface
- Navigate to Audio Settings.
- Set "Accessories" to "Handset"
- Reboot the station.
Handset operation
- When "Accessory" is set to "Handset" the station is by default in loudspeaking mode, i.e. the audio is routed to the speaker and microphone of the front panel of the TFIE station. Audio is also routed to the handset speaker, but the handset microphone is disabled.
- When a call is received, handset mode is activated by pressing the PTT button in the handset. The audio will then be routed to the handset, and the loudspeaker and the microphone in the front panel is muted.
- When the TFIE station returns to idle, e.g. when a call is ended, the station will automatically return to loudspeaking mode.
- In stations with Toggle button (TFIE-1 only), one can also use this button to activate the handset. The button lets you toggle between loudspeaking and handset mode. The LED in the toggle button shows the status:
- Green LED = Loudspeaking mode
- Red LED = Handset mode
Connecting TA-23 to a TCIS series Intercom
- Modify the plastic housing to access the Microphone terminals
- Connect the handset cable as shown below
Configuration
- Log in to the station web interface
- Enable Advanced Configuration Mode
- Navigate to the Audio settings
- In the Audio Inputs section set the "Internal Microphone" to I/O Pin A->D Switch (until call-end), and select Pin number for the PTT signal. See also Audio_Settings_(Devices)#Audio_Inputs.
Handset Operation
To enable the handset, simply press the PTT button on the handset. The handset will remain enabled for the duration of the call.
Dimensions
