Difference between revisions of "Password (IP Stations)"

Latest revision as of 14:17, 16 September 2024

The password of an IP Station can be changed by:

Log into the IP Station
Select Station Administration > Change Password.

Web Password

The Web Password is the password you need to use in the web browser of your PC to get access to the web interface of an IP station.

User: Username is admin
Old Password: Enter the old password for security. Default is alphaadmin
New Password: Enter a new password
Confirm New Password: The new password must be confirmed to avoid misprint

Password requirements

Firmware version 7.5 and higher

Length: minimum 8 - max. 32 characters
At least 3 of the following 4 criteria must be met:
- 1 Digit
- 1 Capital letter
- 1 Small letter
- 1 Special character

Special characters are: ?!@$%*,-.

A Factory Reset will reset to default password.

Firmware version 7.4 and lower

Password can contain numbers and letters only, no other symbols allowed.
Maximum length is 10 characters.

A factory reset will reset to default password.

In INCA stations with software version 01.06 and earlier the default username was ADMIN and the password was alphacom.

Offline Password

This setting is available for INCA Stations only. The Offline password is dialed on the station keypad to get access to the display setup menus. Default password is 1851.

In INCA stations with software version 01.06 and earlier the offline password was 1234.

@@ Line 1: / Line 1: @@
-{{APS}}
+{{AEIPS}}
 The password of an IP Station can be changed by:
 * [[Logging into an IP Station|Log into the IP Station]]
 * Select '''Station Administration''' > '''Change Password'''.
-[[File:PasswordIPStations.PNG|thumb|left|500px]]
+[[File:Password 7 5.PNG|thumb|left|700px]]
 <br style="clear:both;" />
-===Web Password===
+==Web Password==
 The ''Web Password'' is the password you need to use in the web browser of your PC to get access to the web interface of an IP station.
-*'''User:''' The default username '''admin''' can be changed here
+*'''User:''' Username is '''admin'''
 *'''Old Password:''' Enter the old password for security. Default is '''alphaadmin'''
 *'''New Password:''' Enter a new password
 *'''Confirm New Password:''' The new password must be confirmed to avoid misprint
-Password can only contain numbers and letters, no other symbols allowed.
+=== Password requirements ===
+====Firmware version 7.5 and higher====
+* Length: minimum 8 - max. 32 characters
+* At least 3 of the following 4 criteria must be met:
+** 1 Digit
+**1 Capital letter
+**1 Small letter
+**1 Special character
+Special characters are: ?!@$%*,-.
+A Factory Reset will reset to default password.
+====Firmware version 7.4 and lower ====
+* Password can contain numbers and letters only, no other symbols allowed.
+* Maximum length is 10 characters.
 A factory reset will reset to default password.
-=== Offline Password ===
+In INCA stations with software version 01.06 and earlier the default username was '''ADMIN''' and the password was '''alphacom'''.
-This setting is available for [[:Category:INCA Stations|INCA Stations]] only.
+== Offline Password ==
+This setting is available for [[:Category:Stations#INCA_stations|INCA Stations]] only.
 The Offline password is dialed on the station keypad to get access to the [[Display Setup Menu (IP Stations)|display setup menus]]. Default password is '''1851'''.
 In INCA stations with software version 01.06 and earlier the offline password was '''1234'''.
+[[Category: IC-EDGE Configuration]]
 [[Category: Pulse - Configuration]]
 [[Category: SIP intercom - Configuration]]